SKF SY 25 WF Pillow Block Bearing -, 25 mm ID

RS-stocknr.:: 213-2035
Fabrikantnummer:: SY 25 WF
Fabrikant:: SKF

SKF SY 25 WF Pillow Block Bearing -, 25 mm ID

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 63,40

(excl. BTW)

€ 76,71

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 19 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 63,40

*prijsindicatie

RS-stocknr.:: 213-2035
Fabrikantnummer:: SY 25 WF
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Product Type	Pillow Block Bearing
	Inside Diameter	25mm
	Material	Cast Iron
	Centre Height	36.5mm
	Static Load Rating	7.8kN
	Locking Type	Eccentric Locking Collar
	Mount Hole Size	11.5 mm
	Length	160mm
	Depth	36mm
	Dynamic Load Rating	14kN
	End Type	Open
	Mount Hole Centre-to-Centre	102mm
	Number of Bolts	2
	Bore Type	Cylindrical
	Height	70mm
	Standards/Approvals	No
	Series	SY
	Limiting Speed	7000rpm

	Alles selecteren
	Merk SKF
	Product Type Pillow Block Bearing
	Inside Diameter 25mm
	Material Cast Iron
	Centre Height 36.5mm
	Static Load Rating 7.8kN
	Locking Type Eccentric Locking Collar
	Mount Hole Size 11.5 mm
	Length 160mm
	Depth 36mm
	Dynamic Load Rating 14kN
	End Type Open
	Mount Hole Centre-to-Centre 102mm
	Number of Bolts 2
	Bore Type Cylindrical
	Height 70mm
	Standards/Approvals No
	Series SY
	Limiting Speed 7000rpm

Land van herkomst:: IT

SKF Pillow Block Bearing, 25mm ID, 36.5mm Centre Height - SY 25 WF

Looking for a reliable way to mount your industrial shaft? This pillow block bearing from SKF has the job in hand. There are two predrilled bolt holes you can use to mount it on a flat surface. All you need is fasteners with a 10mm diameter. To complete the setup, just slip a 25mm-wide shaft through the unit's inner ring. This part is made from durable cast iron, so it takes the pressure of tough environments in its stride.

Features & Benefits

• Cast-iron housing is impact-resistant, so it takes the knocks you'd expect in an industrial setting

• Can be relubricated to limit friction, minimise wear and ensure a long service life

• Sealed bearing type offers protection against contaminants

Applications

• Construction plants

• Conveyor belts

• Agricultural equipment

What's the load rating of this unit?

This unit can withstand 7.8kN when stationary and 14kN when moving, so it's suitable for heavy-duty applications.

Can I use this unit in humid work areas?

Yes, you can. This pillow block bearing is made from cast iron, which is corrosion-resistant for use in areas with high levels of water vapour.