NSK-RHP PNP35CR Pillow Block Bearing -, 35 mm ID
- RS-stocknr.:
- 232-8647
- Fabrikantnummer:
- PNP35CR
- Fabrikant:
- NSK-RHP
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 145,25
(excl. BTW)
€ 175,75
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 14 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 145,25 |
| 5 - 9 | € 139,44 |
| 10 - 24 | € 136,54 |
| 25 + | € 133,63 |
*prijsindicatie
- RS-stocknr.:
- 232-8647
- Fabrikantnummer:
- PNP35CR
- Fabrikant:
- NSK-RHP
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | NSK-RHP | |
| Product Type | Pillow Block Bearing | |
| Inside Diameter | 35mm | |
| Material | Stainless Steel | |
| Centre Height | 47.6mm | |
| Static Load Rating | 5350N | |
| Mount Hole Size | 14 mm | |
| Length | 167.2mm | |
| Depth | 47.8mm | |
| Mount Hole Centre-to-Centre | 126.9mm | |
| Height | 115.2mm | |
| Standards/Approvals | NSF grade H1 | |
| Limiting Speed | 9910rpm | |
| Alles selecteren | ||
|---|---|---|
Merk NSK-RHP | ||
Product Type Pillow Block Bearing | ||
Inside Diameter 35mm | ||
Material Stainless Steel | ||
Centre Height 47.6mm | ||
Static Load Rating 5350N | ||
Mount Hole Size 14 mm | ||
Length 167.2mm | ||
Depth 47.8mm | ||
Mount Hole Centre-to-Centre 126.9mm | ||
Height 115.2mm | ||
Standards/Approvals NSF grade H1 | ||
Limiting Speed 9910rpm | ||
Vrijgesteld
Self-Lube Pillow Block Bearing - Corrosion Resistant
Designed specifically for use in industries where frequent thorough wash-downs are necessary, optimum hygiene standards are required and chemical resistance is important over a wide temperature range.
Available in pillow block, two bolt flange configurations and are capable of accomodating initial misalignment whilst mounting
Relubrication is possible through the grease nipple and all units are charged with USDA H1 approved food grade grease as standard
Polypropylene and caps are also available for additional protection to the bearing
Gerelateerde Links
- NSK-RHP SNP35 Pillow Block Bearing -, 35 mm ID
- NSK-RHP SNP35EC Pillow Block Bearing -, 35 mm ID
- NSK-RHP SL35 Pillow Block Bearing -, 35 mm ID
- NSK-RHP NP35EC Pillow Block Bearing -, 35 mm ID
- NSK-RHP MP35 Pillow Block Bearing -, 35 mm ID
- NSK PNP35CR Plummer Block Bearing Unit -, 35 mm ID
- NSK-RHP NP35 R Pillow Block Bearing -, 35 mm ID
- NSK-RHP SNP45 Pillow Block Bearing -, 45 mm ID