Igus KSTM-16 Pillow Block Bearing -, 16 mm ID
- RS-stocknr.:
- 311-2673
- Fabrikantnummer:
- KSTM-16
- Fabrikant:
- Igus
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 12,02
(excl. BTW)
€ 14,54
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 46 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 12,02 |
| 5 - 9 | € 11,56 |
| 10 - 24 | € 11,29 |
| 25 + | € 11,07 |
*prijsindicatie
- RS-stocknr.:
- 311-2673
- Fabrikantnummer:
- KSTM-16
- Fabrikant:
- Igus
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Igus | |
| Product Type | Pillow Block Bearing | |
| Inside Diameter | 16mm | |
| Material | Igumid G | |
| Centre Height | 18mm | |
| Mount Hole Size | 6.6 x 12 mm | |
| Length | 86mm | |
| Depth | 21mm | |
| Mount Hole Centre-to-Centre | 60mm | |
| Number of Bolts | 2 | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Igus | ||
Product Type Pillow Block Bearing | ||
Inside Diameter 16mm | ||
Material Igumid G | ||
Centre Height 18mm | ||
Mount Hole Size 6.6 x 12 mm | ||
Length 86mm | ||
Depth 21mm | ||
Mount Hole Centre-to-Centre 60mm | ||
Number of Bolts 2 | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- DE
IGUS® Maintenance Free Pedestal Bearings
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures. The housings are manufactured from an impact resistant, rigid, thermoplastic composite material.
High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements can be supported
Flange Units & Pedestal / Pillow Blocks
IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments.
Low weight (20% of equivalent steel)
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C
Note
IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.
Gerelateerde Links
- Igus KSTM-12 Pillow Block Bearing -, 12 mm ID
- Igus KSTM-08 Pillow Block Bearing -, 8 mm ID
- Igus KSTM-20 Pillow Block Bearing -, 20 mm ID
- Igus KSTM-10 Pillow Block Bearing -, 10 mm ID
- NSK-RHP SL16 Pillow Block Bearing -, 16 mm ID
- Igus ESTM-BB1-F06-B180-ES Pillow Block Bearing -, 6 mm ID
- Igus ESTM-BB1-P12-B180-ES Pillow Block Bearing -, 9 mm ID
- Igus ESTM-BB1-P08-B180-ES Pillow Block Bearing -, 8 mm ID