RS PRO Automatic R 3/8 240V Pneumatic Drain Valve Brass, 123 x 96mm IP65, 0 → 16bar

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Automatic Drain Valve - 240V 50Hz

Introducing the RS automatic and fully programmable drain valves that are designed to provide automatic draining of filter bowls, separators, receivers and other components. The automatic drain is effective at removing condensate and contaminants. The interval time for draining or discharge can be pre-set to meet the requirements of your pneumatic installation.

Features and Benefits:

• Precise self-activated control of fluids and air to a specified programme (media: air, gases, water, oil etc.)
• Automatically opens for a set time to drain condensation
• Length of time open (0.5 to 45 minutes) and frequency both adjustable
• Discharge time 0.5 to 10 seconds
• Minimal risk of internal blockages due to increased internal tolerances
• LED indicator for operational status
• Test facility for manual override
• IP65 timer and solenoid protection, including the connector
• Timer/Solenoid -20 to +40 : Valve Ambient -10 to +50 : Valve Fluid -10 to +80 °C
• 3 years warranty

Typical Applications:

A drain valve is an integral and one of the most important parts of the compressed air system. A condensate drain valve is responsible for removing condensate from the air system without losing excessive compressed air and without letting the system to shut down due to lack of pressure. Condensate is very harmful to air systems when not removed properly. Moisture can cause a series of problems e.g.

• washing oils and greases from production equipment, machinery and tools resulting in repairs and downtime
• inconsistent supplying of dry air causes production quality issues
• excessive rust caused by humidity within the air system can form scale in the air distribution systems

Drain Valves are used in compressed air systems where liquid, gas, or slurries need to be drained from the system.

Warning

  • We do not advise contact with corrosive material
Specificaties
Kenmerk Waarde
Manufacturer Series V9112
Drain Type Automatic
Inlet Port R 3/8
Outlet Port R 3/8
Supply Voltage 240V
Body Material Brass
Seal Material Nitrile Rubber
Dimensions 123 x 96mm
IP Rating IP65
Inlet Port Thread Standard R
Height 123mm
Outlet Port - Thread Size 3/8in
Maximum Operating Pressure 16 bar
Inlet Port - Thread Size 3/8in
Width 96mm
Minimum Operating Pressure 0bar
Outlet Port - Thread Standard R
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
20 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
161,24
(excl. BTW)
195,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 161,24
5 - 9
€ 154,78
10 +
€ 148,33
Related Products
The Festo service unit LFR-1/2-D-MAXI-KF-A consisting of manual ...
Description:
The Festo service unit LFR-1/2-D-MAXI-KF-A consisting of manual on/off valve, filter regulator, distributor module and pressure switch, without socket, with mounting brackets. It has automatic condensate drain. Size MaxiSeries DActuator lock Rotary knob with lockAssembly position Vertical +/- 5° Grade ...
The Festo service unit combination MSB6-1/2:C3J4-WP Comprising manual ...
Description:
The Festo service unit combination MSB6-1/2:C3J4-WP Comprising manual on-off valve, filter regulator, wall mounting plate. Maximum output pressure 12 bar, 5 μm filter, with pressure gauge, lockable regulator head, plastic bowl with plastic bowl guard., fully automatic condensate drain., flow ...
The Norgren 40μm pneumatic filter regulator has a ...
Description:
The Norgren 40μm pneumatic filter regulator has a G 1/2in port connection with an RC thread standard and a maximum operating pressure of 10bar. The regulator has an aluminium body and a bonnet, a brass valve and a polycarbonate bowl ...
IMI Norgren BL07 series pre-asswmbled ready-to-install filter, regulator ...
Description:
IMI Norgren BL07 series pre-asswmbled ready-to-install filter, regulator and lubricator combination sets, fitted with quick-release bayonet bowls, making the device easy to install and maintain. This Excelon design is a comprehensive range of modular FRL air preparation units supplied as ...