Festo MS series 40 μm G3/8 in 14 bar Air Filter 1700L/min max with Manual drain

RS-stocknr.:: 793-210
Fabrikantnummer:: MS4-LF-AGC-E-R-M
Fabrikant:: Festo

Festo MS series 40 μm G3/8 in 14 bar Air Filter 1700L/min max with Manual drain

Subtotaal (1 eenheid)*

€ 67,00

(excl. BTW)

€ 81,07

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 02 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 67,00

*prijsindicatie

RS-stocknr.:: 793-210
Fabrikantnummer:: MS4-LF-AGC-E-R-M
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Filtration Size	40μm
	Product Type	Air Filter
	Port Size	G3/8 in
	Drain Type	Manual
	Connection Thread Standard	G
	Series	MS
	Seal Material	Nitrile Rubber (NBR)
	Maximum Flow Rate	1700L/min
	Maximum Operating Pressure	14 bar
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ISO 8573-1:2010, RoHS
	Bowl Material	Polycarbonate
	Filter Type	Sintered
	Model Number	8232834

	Alles selecteren
	Merk Festo
	Filtration Size 40μm
	Product Type Air Filter
	Port Size G3/8 in
	Drain Type Manual
	Connection Thread Standard G
	Series MS
	Seal Material Nitrile Rubber (NBR)
	Maximum Flow Rate 1700L/min
	Maximum Operating Pressure 14 bar
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ISO 8573-1:2010, RoHS
	Bowl Material Polycarbonate
	Filter Type Sintered
	Model Number 8232834

Land van herkomst:: HU

Festo Series MS Air Filter, 40μm Filtration Size, 1700L/min Nominal Flow - MS4-LF-AGC-E-R-M, Numeric Part Number: 8232834

This Air filter is designed to condition compressed Air and inert gases in industrial pneumatic systems. It combines a centrifugal separator with a sintered element to remove condensate and particles, while a transparent polycarbonate bowl permits Visual inspection. The unit is intended for vertical mounting and operates across typical ambient and media temperatures encountered in factory environments.

Features and Benefits:

• 14 bar Maximum operating pressure gives broad system compatibility
• 40 μm Filtration size reduces particulate ingress into downstream equipment
• 1700 L/min Nominal flow maintains adequate throughput for small systems
• NBR Seal material ensures chemical resistance at contact points
• Manual drain design allows controlled condensate removal

Applications

• Used with pneumatic actuators in assembly lines
• Suitable for compressed Air supply to instrumentation
• Ideal for workshops requiring Visual condensate monitoring
• Can be used for inert gas conditioning in test rigs

What mounting orientation is required for correct operation?

It must be mounted vertically within ±5° to ensure proper condensate separation and drainage.

Which materials contact the process medium and what are they?

The sub-base and housing are die-cast aluminium, the bowl is polycarbonate, the separating plate is POM and Seals are NBR.

How does the design support condensate separation efficiency?

A centrifugal separator ahead of the sintered filter achieves condensate separation greater than 75% before fine filtration.

What temperature range can it tolerate during storage and use?

The device is rated for media, ambient and storage temperatures from -10°C to 60°C.

What standards relate to the purity and material restrictions applied?

It is suitable for compressed Air to ISO 8573-1:2010 and complies with RoHS and VDMA24364-B1/B2-L material requirements.