Norgren Pneufit C Series Banjo In-line Regulator, Inlet Female, Threaded ISO 228/1 6 mm, Outlet Female Push-in Fitting

RS-stocknr.:: 212-9223
Fabrikantnummer:: C0K510605
Fabrikant:: Norgren

Norgren Pneufit C Series Banjo In-line Regulator, Inlet Female, Threaded ISO 228/1 6 mm, Outlet Female Push-in Fitting

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 9,96

(excl. BTW)

€ 12,05

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 - 4	€ 9,96
5 - 9	€ 9,56
10 +	€ 9,16

*prijsindicatie

RS-stocknr.:: 212-9223
Fabrikantnummer:: C0K510605
Fabrikant:: Norgren

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Norgren
	Inlet Connection Type	Threaded
	Product Type	In-line Regulator
	Outlet Connection Type	Push-in Fitting
	Sub Type	Banjo
	Inlet Connection Size	6 mm
	Outlet Connection Size	6 mm
	Series	Pneufit C
	Inlet Thread Standard	ISO 228/1
	Inlet Port Gender	Female
	Maximum Operating Pressure	10 bar
	Outlet Thread Standard	ISO 228/1
	Minimum Operating Temperature	0°C
	Outlet Port Gender	Female
	Material	Polybutylene
	Maximum Operating Temperature	60°C
	Standards/Approvals	No
	Hazardous Area Certification	NO
	Minimum Operating Pressure	0bar
	Proof Pressure	16bar

	Alles selecteren
	Merk Norgren
	Inlet Connection Type Threaded
	Product Type In-line Regulator
	Outlet Connection Type Push-in Fitting
	Sub Type Banjo
	Inlet Connection Size 6 mm
	Outlet Connection Size 6 mm
	Series Pneufit C
	Inlet Thread Standard ISO 228/1
	Inlet Port Gender Female
	Maximum Operating Pressure 10 bar
	Outlet Thread Standard ISO 228/1
	Minimum Operating Temperature 0°C
	Outlet Port Gender Female
	Material Polybutylene
	Maximum Operating Temperature 60°C
	Standards/Approvals No
	Hazardous Area Certification NO
	Minimum Operating Pressure 0bar
	Proof Pressure 16bar

Datasheet - C0K510605

Vrijgesteld

Land van herkomst:: KR

IMI Norgren In-Line Regulator, 10 Bar Maximum Operating Pressure, M5 Threaded Inlet Port - PNEUFIT C Series - C0K510605

Control your pneumatic system's pressure with this banjo-type in-line regulator from IMI Norgren. It maintains constant outputs by regulating different inputs to help support reliable performance. You can achieve fast installation without needing tools, thanks to the M5 threaded inlet and 6mm push-in tubing ports. The nickel-plated brass construction resists corrosion for an extended service life, while silicon-free NBR seals create an airtight network to maximise compression and flow. For versatility, a releasable stainless steel grab-ring firmly attaches nylon or polyurethane hoses.

Features & Benefits

• Pre-applied thread sealant ensures rapid sealing and reduces installation time

• Wide operating temperature range between -20°C and +60°C for use in challenging conditions

Applications

• Factory automation systems

• Medical equipment

• Dental practices

What's the regulator's body made of?

The body is made of PBT for high strength and resistance to chemicals.

How does an in-line regulator work?

A regulator like this one cuts off the flow of compressed air when set limits are reached. This means it detects changes to flow loads and adjusts these to maximise the use of pressurised gases and not waste them.