SMC AS Series Speed Controller Speed Controller, 1/2 in G G 1/2 in Threaded 16 mm
- RS-stocknr.:
- 815-5331
- Fabrikantnummer:
- AS4201FS-04-16S
- Fabrikant:
- SMC
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 32,62
(excl. BTW)
€ 39,47
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 01 juni 2026
- Plus verzending 2 stuk(s) vanaf 01 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 32,62 |
*prijsindicatie
- RS-stocknr.:
- 815-5331
- Fabrikantnummer:
- AS4201FS-04-16S
- Fabrikant:
- SMC
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SMC | |
| Outlet Connection Type | Threaded | |
| Inlet Connection Type | 1/2 in G | |
| Product Type | Speed Controller | |
| Sub Type | Speed Controller | |
| Inlet Connection Size | 1/2 in | |
| Outlet Connection Size | 16 mm | |
| Series | AS | |
| Inlet Thread Standard | G | |
| Maximum Operating Pressure | 1 Mpa | |
| Minimum Operating Temperature | -5°C | |
| Material | Nitrile Rubber (NBR), Steel Wire (Zinc Chromated), POM, Halogenated Nitrile Rubber (HNBR), Brass (Electroless Nickel Plated), Polyphenylene Sulfide, Stainless Steel, Polybutylene Terephthalate | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | ISO 4414, IEC 60204-1, RoHS, ISO 10218-1, ISO 4413 | |
| Minimum Operating Pressure | 0.1MPa | |
| Hazardous Area Certification | No | |
| Proof Pressure | 1.5MPa | |
| Alles selecteren | ||
|---|---|---|
Merk SMC | ||
Outlet Connection Type Threaded | ||
Inlet Connection Type 1/2 in G | ||
Product Type Speed Controller | ||
Sub Type Speed Controller | ||
Inlet Connection Size 1/2 in | ||
Outlet Connection Size 16 mm | ||
Series AS | ||
Inlet Thread Standard G | ||
Maximum Operating Pressure 1 Mpa | ||
Minimum Operating Temperature -5°C | ||
Material Nitrile Rubber (NBR), Steel Wire (Zinc Chromated), POM, Halogenated Nitrile Rubber (HNBR), Brass (Electroless Nickel Plated), Polyphenylene Sulfide, Stainless Steel, Polybutylene Terephthalate | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals ISO 4414, IEC 60204-1, RoHS, ISO 10218-1, ISO 4413 | ||
Minimum Operating Pressure 0.1MPa | ||
Hazardous Area Certification No | ||
Proof Pressure 1.5MPa | ||
- Land van herkomst:
- IN
SMC Series AS Speed Controller, 1/2 inches Inlet Connection size, 16mm Outlet Connection size - AS4201FS-04-16S
This speed controller regulates airflow to control actuator velocity in pneumatic systems. Designed for industrial automation contexts, it connects via a 1/2 inches G inlet and delivers controlled flow through a 16mm threaded outlet. Constructed from a combination of polymers, metals and elastomers, it operates within typical shop and factory temperature and pressure ranges.
Features & Benefits
• Maximum operating pressure 1MPa enables robust system performance
• Proof pressure 1.5MPa provides resistance to transient overpressure
• Operating temperature range -5°C to 60°C supports varied environments
• NBR and HNBR Seals reduce Air leakage and chemical wear
• Brass electroless nickel-plated components resist corrosion in pneumatics
• Proof pressure 1.5MPa provides resistance to transient overpressure
• Operating temperature range -5°C to 60°C supports varied environments
• NBR and HNBR Seals reduce Air leakage and chemical wear
• Brass electroless nickel-plated components resist corrosion in pneumatics
**Applications**
• Suitable for flow control on conveyor cylinder speed adjustment
• Ideal for use in pick-and-place actuator timing
• Used with pneumatic grippers to manage closing velocity
• Can be used for cylinder cushioning in assembly machines
• Ideal for use in pick-and-place actuator timing
• Used with pneumatic grippers to manage closing velocity
• Can be used for cylinder cushioning in assembly machines
What connection standards are required for installation?
It requires a 1/2 inches G threaded inlet compatible with G-thread fittings and a 16mm threaded outlet for downstream tubing or fittings.
Which materials contact the pneumatic medium and what are their advantages?
Sealing materials include nitrile and halogenated nitrile rubbers for wear and chemical resistance while internal components use brass, stainless steel and engineered plastics to balance durability and friction control.
What standards does it adhere to for machine safety and electrical considerations?
The unit conforms to recognised industry standards covering pneumatic and electrical safety practices as listed in its technical approvals.
How should the unit be selected for systems with variable pressure?
Choose it where nominal supply does not exceed 1MPa and allow for a 1.5MPa proof pressure margin to accommodate pressure transients.
Gerelateerde Links
- SMC AS-FS Series Elbow Type Speed Controller, Threaded
- SMC AS-FS Series Elbow Type Speed Controller
- SMC AS-FS Series Elbow Type Speed Controller, Threaded Metric Threaded
- SMC AS-FS Series Elbow Type Speed Controller, Threaded Threaded
- SMC AS-FS Series Elbow Type Speed Controller, Threaded R Threaded
- SMC AS-FS Series Speed Controller Speed Controller Inlet Male Outlet Female Tube
- SMC AS-FS Series Speed Controller, Threaded Threaded
- SMC AS-FS Series Elbow Type Speed Controller Threaded, Outlet Male Threaded