Festo 40 mm Bellow Nitrile Rubber (NBR) Suction Cup ESS-40-BN M6

RS-stocknr.:: 203-8355
Fabrikantnummer:: ESS-40-BN
Fabrikant:: Festo

Festo 40 mm Bellow Nitrile Rubber (NBR) Suction Cup ESS-40-BN M6

Subtotaal (1 eenheid)*

€ 18,04

(excl. BTW)

€ 21,83

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 61 stuk(s) vanaf 03 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 18,04

*prijsindicatie

RS-stocknr.:: 203-8355
Fabrikantnummer:: ESS-40-BN
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Pad Diameter	40mm
	Connection Size	M6
	Product Type	Suction Cup
	Pad Type	Bellow
	Pad Material	Nitrile Rubber (NBR)
	Connection Type	M6
	Series	ESS
	Holding Force	52.3N
	Vacuum Entry Direction	Position of Connection On Top
	Standards/Approvals	RoHS
	Model Number	189386

	Alles selecteren
	Merk Festo
	Pad Diameter 40mm
	Connection Size M6
	Product Type Suction Cup
	Pad Type Bellow
	Pad Material Nitrile Rubber (NBR)
	Connection Type M6
	Series ESS
	Holding Force 52.3N
	Vacuum Entry Direction Position of Connection On Top
	Standards/Approvals RoHS
	Model Number 189386

Land van herkomst:: JP

Festo ESS Series Suction Cup, 40mm Pad Diameter, 52.3N Holding Force - ESS-40-BN, Numeric Part Number: 189386

This suction cup is a vacuum handling pad designed for pick-and-place and material handling in automated systems. It uses a flexible bellows pad to conform to irregular surfaces and connects via an M6 threaded Interface positioned on the TOP for vacuum entry. The pad is MADE from nitrile rubber suitable for general industrial environments and is intended for integration where precise, repeatable grip is required.

Features and Benefits:

• M6 threaded connection enables simple integration with actuators
• Bellows-style pad accommodates uneven surfaces for secure grip
• Nitrile rubber composition resists common oils and greases
• 52.3N holding force supports reliable component transfer
• RoHS compliance aligns with restricted-substance requirements

Applications

• Suitable for automated pick-and-place of electronic components
• Ideal for end-of-arm tooling on robotic manipulators
• Used for handling small electrical assemblies during production
• Can be used for mechanical parts transfer in assembly lines

How is the vacuum supplied to the pad?

The vacuum is introduced through the top-mounted M6 connection, allowing direct pipe or fitting attachment for pneumatic supply.

What surface deformability can be expected from the pad material?

The bellows geometry combined with nitrile rubber delivers elastic conformity to mildly irregular surfaces while maintaining vacuum seal integrity.

How should the pad be mounted to a tool changer or arm?

Use an M6 threaded Interface adaptor or fitting to secure the pad to standard threaded ports on end-of-arm tooling.

What handling force can operators plan for when specifying gripper cycles?

Design calculations should use the 52.3N holding capability as the steady-state grip Value for component retention under vacuum.