Parker Pneumatic Timer 8 bar max
- RS-stocknr.:
- 410-460
- Fabrikantnummer:
- PRT-F10
- Fabrikant:
- Parker
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 270,33
(excl. BTW)
€ 327,10
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 6 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 270,33 |
| 5 + | € 262,09 |
*prijsindicatie
- RS-stocknr.:
- 410-460
- Fabrikantnummer:
- PRT-F10
- Fabrikant:
- Parker
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Parker | |
| Product Type | Pneumatic Timer | |
| Hazardous Area Certification | Conforming to certificate LCIE 866115X, EExe ll T4 | |
| Minimum Operating Pressure | 3bar | |
| Mount Type | DIN Rail | |
| Maximum Operating Pressure | 8 bar | |
| Minimum Operating Temperature | -15°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982) | |
| Alles selecteren | ||
|---|---|---|
Merk Parker | ||
Product Type Pneumatic Timer | ||
Hazardous Area Certification Conforming to certificate LCIE 866115X, EExe ll T4 | ||
Minimum Operating Pressure 3bar | ||
Mount Type DIN Rail | ||
Maximum Operating Pressure 8 bar | ||
Minimum Operating Temperature -15°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982) | ||
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Very Reliable
Long Life Expectancy
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
Note
All logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing o-rings are in the bottom of each unit.
Gerelateerde Links
- Parker Pneumatic Timer 8 bar max
- Crouzet Pneumatic Timer Timer Relay 8 bar max
- Crouzet Pneumatic Timer 8 bar max
- Norgren Pneumatic Timer 10 bar max
- Festo Pneumatic Timer 6 bar max
- Parker 3/8 in Pneumatic Air Lubricator 17 bar, P32 Series
- Parker PLN series 8 bar Pneumatic Logic Controller with NOT function
- Parker PLK series 8 bar Pneumatic Logic Controller with OR function