onsemi NCP1631DR2G, Power Factor Controller, 130 kHz, 20 V 16-Pin, SOIC
- RS-stocknr.:
- 161-2616
- Fabrikantnummer:
- NCP1631DR2G
- Fabrikant:
- onsemi
Subtotaal (1 rol van 2500 eenheden)*
€ 1.877,50
(excl. BTW)
€ 2.272,50
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 03 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 0,751 | € 1.877,50 |
*prijsindicatie
- RS-stocknr.:
- 161-2616
- Fabrikantnummer:
- NCP1631DR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Maximum Switching Frequency | 130 kHz | |
| Start-up Supply Current | 100µA | |
| IC Type | Power Factor Controller IC | |
| Maximum Source Current | 500mA | |
| Maximum Sink Current | 800mA | |
| Maximum Supply Current | 7 mA | |
| Zero Power Detection | Yes | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Pin Count | 16 | |
| Dimensions | 10 x 4 x 1.5mm | |
| Height | 1.5mm | |
| Length | 10mm | |
| Maximum Operating Supply Voltage | 20 V | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Supply Voltage | 10 V | |
| Minimum Operating Temperature | -55 °C | |
| Width | 4mm | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Maximum Switching Frequency 130 kHz | ||
Start-up Supply Current 100µA | ||
IC Type Power Factor Controller IC | ||
Maximum Source Current 500mA | ||
Maximum Sink Current 800mA | ||
Maximum Supply Current 7 mA | ||
Zero Power Detection Yes | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Pin Count 16 | ||
Dimensions 10 x 4 x 1.5mm | ||
Height 1.5mm | ||
Length 10mm | ||
Maximum Operating Supply Voltage 20 V | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Supply Voltage 10 V | ||
Minimum Operating Temperature -55 °C | ||
Width 4mm | ||
The NCP1631 is a controller for use in 2-phase interleaved power factor correction pre-converters. Interleaving consists of paralleling two small stages in lieu of a single big stage. This approach has several merits like ease of implementation, Ability to use smaller components, and better distribution of heating. These attributes make the interleaved PFC topology attractive to slim form factor applications such as flat panel TVs and ultra-slim notebook adapters.
180° out of phase operation
Frequency foldback at low power
Integrated Over current protection, overvoltage protection, UVLO, and brown-out protection
Frequency clamped critical conduction mode (FcCrM) operation
Low EMI and reduces RMS current in the bulk capacitor
Improved light load efficiency
Increased robustness with few external components
Optimized efficiency over the load range