Infineon, PFC Controller 250 kHz 8-Pin, DSO-8 25 V
- RS-stocknr.:
- 244-1585
- Fabrikantnummer:
- ICE2PCS05GXUMA1
- Fabrikant:
- Infineon
Subtotaal (1 rol van 2500 eenheden)*
€ 1.047,50
(excl. BTW)
€ 1.267,50
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 29 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 0,419 | € 1.047,50 |
*prijsindicatie
- RS-stocknr.:
- 244-1585
- Fabrikantnummer:
- ICE2PCS05GXUMA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Product Type | PFC Controller | |
| Start-up Supply Current | 450μA | |
| Maximum Source Current | 38μA | |
| Maximum Sink Current | 41μA | |
| Switching Frequency | 250kHz | |
| Supply Current | 1.3mA | |
| Mount Type | Surface | |
| Package Type | DSO-8 | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 25V | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | IEC 1000-3-2 | |
| Length | 5mm | |
| Height | 1.75mm | |
| Width | 4 mm | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Product Type PFC Controller | ||
Start-up Supply Current 450μA | ||
Maximum Source Current 38μA | ||
Maximum Sink Current 41μA | ||
Switching Frequency 250kHz | ||
Supply Current 1.3mA | ||
Mount Type Surface | ||
Package Type DSO-8 | ||
Pin Count 8 | ||
Maximum Supply Voltage 25V | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals IEC 1000-3-2 | ||
Length 5mm | ||
Height 1.75mm | ||
Width 4 mm | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
The Infineon Power Factor Correction (PFC) Controller in Continuous Conduction Mode (CCM) is a 8-pins wide input range controller IC for active power factor correction converters. It is designed for converters in boost topology, and requires few external components. Its power supply is recommended to be provided by an external auxiliary supply which will switch on and off the IC.
Average Current Control
Supports Wide Range
Programmable Operating/Switching Frequency
Enhanced Dynamic Response
Open Loop Detection
Output Over-Voltage Protection
Cycle by Cycle Peak Current Limiting
VCC Under-Voltage Lockout