STMicroelectronics, Power Factor Controller IC 130 kHz 10-Pin, SSOP-10 24.5 V
- RS-stocknr.:
- 249-0876
- Fabrikantnummer:
- L4986B
- Fabrikant:
- STMicroelectronics
Subtotaal (1 tube van 100 eenheden)*
€ 145,90
(excl. BTW)
€ 176,50
(incl. BTW)
Voeg 100 eenheden toe voor gratis bezorging
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk | Per tube* |
|---|---|---|
| 100 + | € 1,459 | € 145,90 |
*prijsindicatie
- RS-stocknr.:
- 249-0876
- Fabrikantnummer:
- L4986B
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 550μA | |
| Maximum Source Current | -0.7A | |
| Sub Type | Power Factor Controller IC | |
| Maximum Sink Current | 1.5A | |
| Switching Frequency | 130kHz | |
| Supply Current | 25mA | |
| Mount Type | Surface | |
| Package Type | SSOP-10 | |
| Pin Count | 10 | |
| Minimum Supply Voltage | 10V | |
| Maximum Supply Voltage | 24.5V | |
| Minimum Operating Temperature | -40°C | |
| Width | 4 mm | |
| Height | 1.75mm | |
| Length | 5mm | |
| Standards/Approvals | JEIDA-MITI, EN 61000-3-2, IEC 60601-1-2 | |
| Series | L4986 | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 550μA | ||
Maximum Source Current -0.7A | ||
Sub Type Power Factor Controller IC | ||
Maximum Sink Current 1.5A | ||
Switching Frequency 130kHz | ||
Supply Current 25mA | ||
Mount Type Surface | ||
Package Type SSOP-10 | ||
Pin Count 10 | ||
Minimum Supply Voltage 10V | ||
Maximum Supply Voltage 24.5V | ||
Minimum Operating Temperature -40°C | ||
Width 4 mm | ||
Height 1.75mm | ||
Length 5mm | ||
Standards/Approvals JEIDA-MITI, EN 61000-3-2, IEC 60601-1-2 | ||
Series L4986 | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
The STMicroelectronics continuous conduction mode power factor correction controller with high voltage start-up to boost converter with a proprietary multiplier "emulator" which in addition to the innovative THD optimizers guarantee very low total harmonic distortion (THD) performance in all operating conditions. This device comes in a pin SSOP10 package and offers a high performance/low-component count solution for CCM-operated boost PFC pre-regulators in EN61000-3-2 and JEIDA-MITI compliant applications, in a power range that spans from few hundred W to some kW.
Peak current mode CCM-operated
800 V high voltage start-up with integrated input voltage sensing
Active input filter capacitor discharge
Disable and low consumption function
In-rush current monitoring
65 kHz (A version) and 130 kHz (B version) switching frequency