onsemi, Power Factor Controller IC 130 kHz 10-Pin, SOIC 35 V
- RS-stocknr.:
- 261-9535P
- Fabrikantnummer:
- NCP1618JDR2G
- Fabrikant:
- onsemi
Bulkkorting beschikbaar
Subtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 78,40
(excl. BTW)
€ 94,85
(incl. BTW)
Voeg 50 eenheden toe voor gratis bezorging
Op voorraad
- 2.500 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 95 | € 1,568 |
| 100 - 495 | € 1,358 |
| 500 - 995 | € 1,192 |
| 1000 + | € 1,088 |
*prijsindicatie
- RS-stocknr.:
- 261-9535P
- Fabrikantnummer:
- NCP1618JDR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 4mA | |
| Maximum Source Current | 500mA | |
| Sub Type | Controller | |
| Switching Frequency | 130kHz | |
| Maximum Sink Current | 800mA | |
| Supply Current | 4mA | |
| Package Type | SOIC | |
| Pin Count | 10 | |
| Minimum Supply Voltage | 9.6V | |
| Maximum Supply Voltage | 35V | |
| Minimum Operating Temperature | -40°C | |
| Series | NCP1618 | |
| Standards/Approvals | RoHS | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 4mA | ||
Maximum Source Current 500mA | ||
Sub Type Controller | ||
Switching Frequency 130kHz | ||
Maximum Sink Current 800mA | ||
Supply Current 4mA | ||
Package Type SOIC | ||
Pin Count 10 | ||
Minimum Supply Voltage 9.6V | ||
Maximum Supply Voltage 35V | ||
Minimum Operating Temperature -40°C | ||
Series NCP1618 | ||
Standards/Approvals RoHS | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor power factor correction is an innovative multimode power factor controller with the circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line load range. In very light−load conditions, the circuit can enter the soft skip mode for minimized losses.
Load transient compensation
Switching frequency is lower than 130 kHz
Unity power factor