ROHM BD7695FJ-E2, Power Factor Correction IC 8-Pin, SOP-J8 38 V
- RS-stocknr.:
- 266-3783
- Fabrikantnummer:
- BD7695FJ-E2
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 10 eenheden)*
€ 8,57
(excl. BTW)
€ 10,37
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 2.490 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 - 40 | € 0,857 | € 8,57 |
| 50 - 90 | € 0,812 | € 8,12 |
| 100 - 240 | € 0,667 | € 6,67 |
| 250 - 990 | € 0,625 | € 6,25 |
| 1000 + | € 0,437 | € 4,37 |
*prijsindicatie
- RS-stocknr.:
- 266-3783
- Fabrikantnummer:
- BD7695FJ-E2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Product Type | Power Factor Correction IC | |
| Start-up Supply Current | 60μA | |
| Sub Type | Controller | |
| Maximum Source Current | 130μA | |
| Maximum Sink Current | 130μA | |
| Supply Current | 0.6mA | |
| Mount Type | PCB | |
| Package Type | SOP-J8 | |
| Minimum Supply Voltage | 12V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 38V | |
| Minimum Operating Temperature | -40°C | |
| Height | 1.65mm | |
| Standards/Approvals | RoHS | |
| Length | 6mm | |
| Width | 4.9 mm | |
| Series | BD7695FJ | |
| Maximum Operating Temperature | 105°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Product Type Power Factor Correction IC | ||
Start-up Supply Current 60μA | ||
Sub Type Controller | ||
Maximum Source Current 130μA | ||
Maximum Sink Current 130μA | ||
Supply Current 0.6mA | ||
Mount Type PCB | ||
Package Type SOP-J8 | ||
Minimum Supply Voltage 12V | ||
Pin Count 8 | ||
Maximum Supply Voltage 38V | ||
Minimum Operating Temperature -40°C | ||
Height 1.65mm | ||
Standards/Approvals RoHS | ||
Length 6mm | ||
Width 4.9 mm | ||
Series BD7695FJ | ||
Maximum Operating Temperature 105°C | ||
Automotive Standard No | ||
The ROHM power factor correction IC is suitable for AC or DC supply, also for all products needing power factor improvement. The PFC adopts boundary conduction mode and switching loss reduction and noise reduction are possible by zero current detection. This IC incorporates a circuit for reducing total harmonics distortion and can support IEC61000-3-2 Class-C.
Low power consumption
VCC UVLO function
Static OVP by the vs pin error amplifier input short protection
Stable MOSFET gate drive soft start