Texas Instruments LM5118EVAL/NOPB Buck-Boost Controller for LM5118

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Evaluation Board for the LM5118 Wide Input 5V to 75V Buck-Boost Controller

The LM5118 Evaluation Board is designed to provide the design engineer with a fully functional, Emulated Current Mode Control, buck-boost power converter
The board provides a 12V output with 3A of output current capability
Wide input voltage range from 5 to 75V, with operation down to 3V with some component changes
Operates at 300kHz, a good compromise between conversion efficiency, tradeoffs between buck and buck-boost mode requirements, and converter size
Single inductor architecture
Programmable soft-start
Ultra low (<10μA) shutdown current
Enable input
Thermal Shutdown

DC/DC Controllers (External Switch), Texas Instruments

Specificaties
Kenmerk Waarde
Power Management Function Buck-Boost Controller
Kit Classification Evaluation Board
Featured Device LM5118
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
84,84
(excl. BTW)
102,66
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
€ 84,84
2 - 4
€ 80,60
5 - 9
€ 76,57
10 - 24
€ 72,74
25 +
€ 69,10
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Related Products
Linear Technology product series of synchronous and non-synchronous ...
Description:
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, ...
The ISL68200DEMO1Z is a Demonstration Board, based on ...
Description:
The ISL68200DEMO1Z is a Demonstration Board, based on the ISL68200, a single phase R4 technology Digital Hybrid PWM Controller with integrated Driver, and PMBus/SMBus/I²C and PFM Interface. Transient performance, fault protections, DC/AC regulations, PMBus programming, power sequencing, margining and other ...
The NCP1014GTGEVB Green point(TM) reference design board has ...
Description:
The NCP1014GTGEVB Green point(TM) reference design board has been specifically designed to meet the > 0.7 power factor requirements of residential Energy Star(R) LED Luminaries without the addition of extra circuitry. This makes the driver an ideal candidate for products ...
The NCP1532 dual step down DCDC converter is ...
Description:
The NCP1532 dual step down DCDC converter is a monolithic integrated circuit dedicated to supply core and I/O voltages of new multimedia design in portable applications powered from 1-cell Li-ion or 3 cell Alkaline/NiCd/NiMH batteries. Both channels are externally adjustable ...