Omron Socket Power Relay, 110V dc Coil, 7A Switching Current, DPDT

RS-stocknr.:: 181-132
Fabrikantnummer:: MM2XP DC100/110
Fabrikant:: Omron

Omron Socket Power Relay, 110V dc Coil, 7A Switching Current, DPDT

Afbeelding representeert productcategorie

Momenteel niet beschikbaar

Sorry, we weten niet wanneer dit weer voorradig zal zijn.

RS-stocknr.:: 181-132
Fabrikantnummer:: MM2XP DC100/110
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Coil Voltage	110V dc
	Product Type	Power Relay
	Contact Configuration	DPDT
	Mount Type	Socket
	Series	MM2XP
	Terminal Type	Plug-In
	Switching Current	7A
	Minimum Operating Temperature	-10°C
	Switching AC Voltage	250V ac
	Switching DC Voltage	250V dc
	Switching Power	770W
	Maximum Operating Temperature	55°C
	Coil Resistance	5750Ω
	Coil Power	2.1W
	Width	48mm
	Standards/Approvals	No
	Height	73mm
	Length	80.5mm
	Contact Material	Silver
	Contact Resistance	50mΩ

	Alles selecteren
	Merk Omron
	Coil Voltage 110V dc
	Product Type Power Relay
	Contact Configuration DPDT
	Mount Type Socket
	Series MM2XP
	Terminal Type Plug-In
	Switching Current 7A
	Minimum Operating Temperature -10°C
	Switching AC Voltage 250V ac
	Switching DC Voltage 250V dc
	Switching Power 770W
	Maximum Operating Temperature 55°C
	Coil Resistance 5750Ω
	Coil Power 2.1W
	Width 48mm
	Standards/Approvals No
	Height 73mm
	Length 80.5mm
	Contact Material Silver
	Contact Resistance 50mΩ

Datasheet - MM2XP DC100/110

Land van herkomst:: JP

Omron MM2XP Series Power Relay, 110V Coil Voltage, 7A Switching Current - MM2XP DC100/110

This power relay provides electromechanical switching for control and automation systems, converting a DC Coil input into a dual changeover contact output for use in industrial and electronic installations. It is intended for socket mounting and plug-in Terminal arrangements, offering a Compact footprint and a Coil designed for DC control voltages in moderate-temperature environments.

Features and Benefits:

• DPDT silver contacts reduce contact wear and enhance conductivity
• 7A switching current supports moderate load circuits
• 110V DC Coil consumes 2.1W for predictable drive requirements
• 5750Ω Coil resistance enables straightforward Coil checking
• 50mΩ contact resistance minimises voltage drop in switched circuits

Applications

• Suitable for control panels requiring dual changeover switching
• Ideal for industrial automation logic and relay interposing
• Used for signal routing in electronic testing rigs
• Can be used for auxiliary switching in mechanical systems

What Terminal and mounting arrangements are provided for Rapid installation?

The unit uses plug-in terminals and is designed for socket mounting to allow quick replacement and straightforward wiring during maintenance.

How does the relay behave across typical ambient temperatures?

It operates within a limited temperature range from -10°C up to 55°C, so it is suited to indoor and temperature-controlled industrial locations.

What materials and electrical loss characteristics affect contact performance?

The contacts are silver-based, offering low contact resistance measured at about 50mΩ which helps reduce contact heating and energy loss during switching.

How can technicians verify Coil integrity without specialised equipment?

Coil resistance is approximately 5750Ω

a Basic ohmmeter can confirm continuity and approximate resistance to identify Coil faults.

What Coil drive specifications should be matched by control circuitry?

The Coil requires a 110V DC supply and draws about 2.1W, so drive circuits must deliver that voltage and current for reliable actuation.