Omron Non-Latching Relay, 48V dc Coil, 5A Switching Current, DPDT

RS-stocknr.:: 215-7254
Fabrikantnummer:: G2R-2-SNI 48VDC (S)
Fabrikant:: Omron

Omron Non-Latching Relay, 48V dc Coil, 5A Switching Current, DPDT

Subtotaal (1 eenheid)*

€ 10,81

(excl. BTW)

€ 13,08

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 10,81

*prijsindicatie

RS-stocknr.:: 215-7254
Fabrikantnummer:: G2R-2-SNI 48VDC (S)
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Non-Latching Relay
	Coil Voltage	48V dc
	Contact Configuration	DPDT
	Series	G2R
	Terminal Type	Plug-In
	Switching Current	5A
	Switching AC Voltage	440V ac
	Switching Power	150W
	Switching DC Voltage	125V dc
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Coil Resistance	4.2kΩ
	Height	35.5mm
	Width	13mm
	Coil Power	530mW
	Standards/Approvals	RoHS
	Length	29mm
	Contact Material	Silver Alloy
	Contact Resistance	100mΩ

	Alles selecteren
	Merk Omron
	Product Type Non-Latching Relay
	Coil Voltage 48V dc
	Contact Configuration DPDT
	Series G2R
	Terminal Type Plug-In
	Switching Current 5A
	Switching AC Voltage 440V ac
	Switching Power 150W
	Switching DC Voltage 125V dc
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Coil Resistance 4.2kΩ
	Height 35.5mm
	Width 13mm
	Coil Power 530mW
	Standards/Approvals RoHS
	Length 29mm
	Contact Material Silver Alloy
	Contact Resistance 100mΩ

Datasheet - G2R-2-SNI 48VDC (S)

Omron G2R Series Non-Latching Relay, 48V DC Coil Voltage, DPDT Contact Configuration - G2R-2-SNI 48VDC (S)

This non-latching relay provides double-pole double-throw switching for control and automation tasks where a transient or momentary changeover is required. Designed for plug-in installation, it operates from a 48VDC Coil and suits industrial electrical and mechanical systems that demand compact, repeatable switching performance.

Features and Benefits:

• 48VDC Coil consumes 530mW offering low energy operation
• DPDT contact arrangement enables independent dual-circuit control
• Silver alloy contacts deliver reduced contact resistance at 100mΩ
• Switches up to 5A at 380V AC for moderate power loads
• 125VDC switching capability supports DC load applications
• Coil resistance of 4220Ω ensures predictable drive characteristics

Applications

• Suitable for industrial control cabinets requiring plug-in relays
• Ideal for automation panels managing multiple circuits
• Used for switching DC loads in power distribution modules
• Can be used for signal routing in test and measurement rigs
• Suitable for mechanical systems needing Compact changeover switching

What temperature range can it withstand in operational settings?

It is specified to operate between -40°C and 70°C, covering typical industrial ambient conditions.

How does the Terminal style affect installation and maintenance?

The plug-in Terminal format allows quick insertion and replacement without soldering, simplifying swap-outs on control racks.

What material considerations affect contact longevity in switching tasks?

Contacts use a silver alloy which gives favourable electrical conductivity and wear characteristics for repeated make-and-break cycles.

What is the relay’s Peak switching power for DC applications?

The relay is rated to handle up to 150W switching power, suitable for moderate DC switching duties.