Omron PCB Power Relay, 24V dc Coil, 5A Switching Current, DPDT

RS-stocknr.:: 807-4453
Fabrikantnummer:: G2R-24 DC24
Fabrikant:: Omron

Omron PCB Power Relay, 24V dc Coil, 5A Switching Current, DPDT

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 8,58

(excl. BTW)

€ 10,38

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

11 stuk(s) klaar voor verzending
493 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 24	€ 8,58
25 - 49	€ 6,83
50 - 99	€ 6,49
100 - 249	€ 6,30
250 +	€ 6,13

*prijsindicatie

RS-stocknr.:: 807-4453
Fabrikantnummer:: G2R-24 DC24
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Coil Voltage	24V dc
	Product Type	Power Relay
	Contact Configuration	DPDT
	Mount Type	PCB
	Series	G2R
	Terminal Type	PCB Pin
	Switching Current	5A
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	125V dc
	Switching AC Voltage	125V ac
	Switching Power	600mW
	Maximum Operating Temperature	70°C
	Coil Resistance	1.1kΩ
	Width	13mm
	Standards/Approvals	CSA, UL
	Coil Power	530mW
	Height	25.5mm
	Length	29mm
	Contact Material	Silver Alloy
	Contact Resistance	50mΩ

	Alles selecteren
	Merk Omron
	Coil Voltage 24V dc
	Product Type Power Relay
	Contact Configuration DPDT
	Mount Type PCB
	Series G2R
	Terminal Type PCB Pin
	Switching Current 5A
	Minimum Operating Temperature -40°C
	Switching DC Voltage 125V dc
	Switching AC Voltage 125V ac
	Switching Power 600mW
	Maximum Operating Temperature 70°C
	Coil Resistance 1.1kΩ
	Width 13mm
	Standards/Approvals CSA, UL
	Coil Power 530mW
	Height 25.5mm
	Length 29mm
	Contact Material Silver Alloy
	Contact Resistance 50mΩ

G2R PCB Power Relay

Omron G2R Series Power Relay, 24V Coil Voltage, 5A Switching Current - G2R-24 DC24

This power relay is a Compact electromechanical switching device designed for PCB mounting in industrial control and automation systems. It operates from a 24V DC Coil and provides dual-pole changeover switching suited to signal routing and load control in electronic and electrical assemblies.

Features and Benefits:

• 530mW Coil power reduces heat generation and energy draw • 1.1kΩ Coil resistance ensures predictable drive current • DPDT contact arrangement enables two independent circuits • Silver alloy contacts provide consistent conductivity and wear resistance • 5A switching current allows moderate load control up to125V • PCB pin terminals permit secure through-board installation

Applications

• Suitable for relay logic in factory automation panels • Ideal for control of auxiliary circuits in machinery • Used with PLC output stages for load isolation • Can be used for signal switching in test equipment • Suitable for replacement modules in industrial PCBs

What Coil drive current is required to energise the device?

With a 24V DC Coil and 1.1kΩ resistance the steady-state Coil current is approximately21.8mA, matching the 530mW Coil power rating under nominal voltage.

What environmental temperature range can it withstand during operation?

It is rated to operate between -40°C and70°C, making it suitable for a wide span of indoor industrial environments.

How is this component secured to a printed circuit board?

The unit uses PCB pin terminals designed for through-hole soldering to provide mechanical retention and reliable electrical connection.

What approvals support its use in regulatory-conscious installations?

It carries CSA and UL approvals, indicating adherence to recognised safety standards for electrical components.

Approvals

UL508; CSA22.2; EN 61810-1; SEV; SEMKO