STMicroelectronics VN330SPTR-E High Side, High Side Power Switch IC 10-Pin, PowerSO-10
- RS-stocknr.:
- 151-491P
- Fabrikantnummer:
- VN330SPTR-E
- Fabrikant:
- STMicroelectronics
Momenteel niet beschikbaar
Sorry, we weten niet wanneer dit weer voorradig zal zijn.
- RS-stocknr.:
- 151-491P
- Fabrikantnummer:
- VN330SPTR-E
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Power Switch Type | High Side | |
| Product Type | Power Switch IC | |
| Power Switch Topology | High Side | |
| Switch On Resistance RdsOn | 0.2Ω | |
| Number of Outputs | 4 | |
| Minimum Supply Voltage | 10V | |
| Package Type | PowerSO-10 | |
| Pin Count | 10 | |
| Maximum Supply Voltage | 36V | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 0.7A | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | IEC 61131-2 | |
| Automotive Standard | No | |
| Series | VN330SP-E | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Power Switch Type High Side | ||
Product Type Power Switch IC | ||
Power Switch Topology High Side | ||
Switch On Resistance RdsOn 0.2Ω | ||
Number of Outputs 4 | ||
Minimum Supply Voltage 10V | ||
Package Type PowerSO-10 | ||
Pin Count 10 | ||
Maximum Supply Voltage 36V | ||
Minimum Operating Temperature -40°C | ||
Operating Current 0.7A | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals IEC 61131-2 | ||
Automotive Standard No | ||
Series VN330SP-E | ||
- Land van herkomst:
- MY
The STMicroelectronics solid-state relay, it is monolithic device developed using VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from over temperature and short-circuit. The open drain diagnostic output indicates over temperature conditions.
Built-in current limiter
Undervoltage shutdown
Open drain diagnostic output