STMicroelectronics VNI4140KTR High Side 8, High Side Power Switch IC 24-Pin, PowerSSO-24
- RS-stocknr.:
- 151-503P
- Fabrikantnummer:
- VNI4140KTR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Subtotaal 10 eenheden (geleverd op een doorlopende strip)*
€ 45,50
(excl. BTW)
€ 55,10
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 1.000 stuk(s) vanaf 27 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 99 | € 4,55 |
| 100 + | € 4,49 |
*prijsindicatie
- RS-stocknr.:
- 151-503P
- Fabrikantnummer:
- VNI4140KTR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Power Switch Topology | High Side | |
| Power Switch Type | High Side | |
| Product Type | Power Switch IC | |
| Number of Inputs | 8 | |
| Mount Type | Surface | |
| Package Type | PowerSSO-24 | |
| Maximum Supply Voltage | 36V | |
| Pin Count | 24 | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 1A | |
| Maximum Operating Temperature | 125°C | |
| Length | 8mm | |
| Standards/Approvals | RoHS | |
| Height | 1mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Power Switch Topology High Side | ||
Power Switch Type High Side | ||
Product Type Power Switch IC | ||
Number of Inputs 8 | ||
Mount Type Surface | ||
Package Type PowerSSO-24 | ||
Maximum Supply Voltage 36V | ||
Pin Count 24 | ||
Minimum Operating Temperature -40°C | ||
Operating Current 1A | ||
Maximum Operating Temperature 125°C | ||
Length 8mm | ||
Standards/Approvals RoHS | ||
Height 1mm | ||
Automotive Standard No | ||
- Land van herkomst:
- MY
The STMicroelectronics solid state relay, it is a monolithic device designed using VIPower technology. In overload conditions, channel turns OFF and ON automatically to maintain the junction temperature between TTSD and TR. If the case temperature reaches TCSD, the overloaded channel is turned OFF and restarts only when case temperature decreases down to TCR. In order to avoid high-peak current from the supply, when more than one channel is overloaded the TCSD restart is not simultaneous. Non overloaded channels continue to operate normally.
Shorted load protections
Junction over temperature protection
Case over temperature protection for thermal independence of the channels