STMicroelectronics VN9E30FTR High Side, High Side Power Switch IC 32-Pin, QFN 6 x 6

RS-stocknr.:: 285-635
Fabrikantnummer:: VN9E30FTR
Fabrikant:: STMicroelectronics

STMicroelectronics VN9E30FTR High Side, High Side Power Switch IC 32-Pin, QFN 6 x 6

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 2,51

(excl. BTW)

€ 3,04

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 - 9	€ 2,51
10 - 99	€ 2,45
100 +	€ 2,39

*prijsindicatie

RS-stocknr.:: 285-635
Fabrikantnummer:: VN9E30FTR
Fabrikant:: STMicroelectronics

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	STMicroelectronics
	Power Switch Topology	High Side
	Product Type	Power Switch IC
	Power Switch Type	High Side
	Number of Outputs	6
	Power Rating	4.0625W
	Interface Type	SPI
	Package Type	QFN 6 x 6
	Maximum Supply Voltage	28V
	Pin Count	32
	Operating Current	35A
	Maximum Operating Temperature	150°C
	Minimum Operating Temperature	-60°C
	Standards/Approvals	IEC/EN 60947-7-1, IEC/EN 2
	Automotive Standard	No

	Alles selecteren
	Merk STMicroelectronics
	Power Switch Topology High Side
	Product Type Power Switch IC
	Power Switch Type High Side
	Number of Outputs 6
	Power Rating 4.0625W
	Interface Type SPI
	Package Type QFN 6 x 6
	Maximum Supply Voltage 28V
	Pin Count 32
	Operating Current 35A
	Maximum Operating Temperature 150°C
	Minimum Operating Temperature -60°C
	Standards/Approvals IEC/EN 60947-7-1, IEC/EN 2
	Automotive Standard No

Datasheet - VN9E30FTR

The STMicroelectronics VN9E30F is a device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads directly connected to ground. The device is protected against voltage transient on the VCC pin (see ISO7637 transient compatibility table). Programming, control and diagnostics are implemented via the SPI bus. A digital current sense feedback for each channel is provided through an integrated 10-bit ADC with 0.1% of FSR. Dedicated trimming bits allow to adjust the ADC reference current. The device detects open-load in OFF-state conditions. Real time diagnostics is available through the SPI bus (open-load, output short to VCC, over temperature, communication error, power limitation or latch off). Output current limitation protects the device in an overload condition.

Integrated PWM engine with independent phase shift and frequency generation for each channel

Integrated 10 bit ADC for digital current sense

Programmable bulb or LED mode for all channels

Advanced limp home functions for robust fail safe system

Very low electromagnetic susceptibility

Control through direct inputs and/or SPI

Compliant with European directive 2002 or 95 or EC

Synchronous diagnostics of overload and short to GND and output shorted to VCC and OFF state open load events

Programmable case over temperature warning

Two level load current limitation

Self limiting of fast thermal transients

STMicroelectronics VN9E30FTR High Side, High Side Power Switch IC 32-Pin, QFN 6 x 6

Gerelateerde Links