MPS MP5016HGQH-P 1, Load Switch Power Control Switch 10-Pin, QFN-10
- RS-stocknr.:
- 337-685
- Fabrikantnummer:
- MP5016HGQH-P
- Fabrikant:
- MPS
Subtotaal (1 rol van 500 eenheden)*
€ 562,00
(excl. BTW)
€ 680,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 15 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 500 + | € 1,124 | € 562,00 |
*prijsindicatie
- RS-stocknr.:
- 337-685
- Fabrikantnummer:
- MP5016HGQH-P
- Fabrikant:
- MPS
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | MPS | |
| Product Type | Power Control Switch | |
| Power Switch Type | Load Switch | |
| Switch On Resistance RdsOn | 43mΩ | |
| Number of Outputs | 1 | |
| Number of Inputs | 1 | |
| Power Rating | 2.23W | |
| Minimum Supply Voltage | 2.7V | |
| Package Type | QFN-10 | |
| Pin Count | 10 | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -40°C | |
| Width | 1.5 mm | |
| Length | 2mm | |
| Alles selecteren | ||
|---|---|---|
Merk MPS | ||
Product Type Power Control Switch | ||
Power Switch Type Load Switch | ||
Switch On Resistance RdsOn 43mΩ | ||
Number of Outputs 1 | ||
Number of Inputs 1 | ||
Power Rating 2.23W | ||
Minimum Supply Voltage 2.7V | ||
Package Type QFN-10 | ||
Pin Count 10 | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -40°C | ||
Width 1.5 mm | ||
Length 2mm | ||
- Land van herkomst:
- CN
The MPS International Ltd Current Limit Switch with Over Voltage Clamp and Reverse Block is a protection device designed to protect circuitry on the output from transients on the input. Its also protects the input from undesired shorts and transients coming from the output. During start up, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by the DV/DT pin setting and MODE pin setting. The maximum load at the output is current limited.
Reverse blocking MOSFET driver
Soft start time programmable through DV/DT and MODE
Fast response for hard short protection
Over current protection hiccup protection