MPS MP5036GJ-P 1, Load Switch Power Control Switch 6-Pin, TSOT-23-6
- RS-stocknr.:
- 337-690
- Fabrikantnummer:
- MP5036GJ-P
- Fabrikant:
- MPS
Subtotaal (1 rol van 500 eenheden)*
€ 411,50
(excl. BTW)
€ 498,00
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 500 + | € 0,823 | € 411,50 |
*prijsindicatie
- RS-stocknr.:
- 337-690
- Fabrikantnummer:
- MP5036GJ-P
- Fabrikant:
- MPS
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | MPS | |
| Power Switch Type | Load Switch | |
| Product Type | Power Control Switch | |
| Switch On Resistance RdsOn | 43mΩ | |
| Power Rating | 1.89W | |
| Number of Inputs | 1 | |
| Mount Type | Surface Mount | |
| Package Type | TSOT-23-6 | |
| Minimum Supply Voltage | 2.9V | |
| Maximum Supply Voltage | 14V | |
| Pin Count | 6 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS | |
| Length | 2.9mm | |
| Series | MP5036 | |
| Alles selecteren | ||
|---|---|---|
Merk MPS | ||
Power Switch Type Load Switch | ||
Product Type Power Control Switch | ||
Switch On Resistance RdsOn 43mΩ | ||
Power Rating 1.89W | ||
Number of Inputs 1 | ||
Mount Type Surface Mount | ||
Package Type TSOT-23-6 | ||
Minimum Supply Voltage 2.9V | ||
Maximum Supply Voltage 14V | ||
Pin Count 6 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS | ||
Length 2.9mm | ||
Series MP5036 | ||
- Land van herkomst:
- CN
The MPS International Ltd Current Limit Switch with 15V Over Voltage Clamp is a protection device designed to protect circuitry on the output from transients on the input. It also protects the input from undesired shorts and transients coming from the output. During start up, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by the DV/DT pin setting.
Soft start time programmable through the DV/DT pin
Fast response for hard short protection
OCP hiccup protection
Thermal shutdown and auto retry