Microchip MIC2039EYMT-TR High Side 1, High Side Power Switch IC 6-Pin, TDFN (2 x 2 mm) (Thin DFN-6)
- RS-stocknr.:
- 598-267
- Fabrikantnummer:
- MIC2039EYMT-TR
- Fabrikant:
- Microchip
Subtotaal (1 rol van 5000 eenheden)*
€ 4.800,00
(excl. BTW)
€ 5.800,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 08 maart 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 5000 + | € 0,96 | € 4.800,00 |
*prijsindicatie
- RS-stocknr.:
- 598-267
- Fabrikantnummer:
- MIC2039EYMT-TR
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Power Switch IC | |
| Power Switch Type | High Side | |
| Power Switch Topology | High Side | |
| Switch On Resistance RdsOn | 125mΩ | |
| Number of Inputs | 1 | |
| Mount Type | Surface | |
| Package Type | TDFN (2 x 2 mm) (Thin DFN-6) | |
| Minimum Supply Voltage | 2.5V | |
| Pin Count | 6 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | 40°C | |
| Operating Current | 300μA | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS Compliant | |
| Automotive Standard | No | |
| Series | MIC2039 | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Power Switch IC | ||
Power Switch Type High Side | ||
Power Switch Topology High Side | ||
Switch On Resistance RdsOn 125mΩ | ||
Number of Inputs 1 | ||
Mount Type Surface | ||
Package Type TDFN (2 x 2 mm) (Thin DFN-6) | ||
Minimum Supply Voltage 2.5V | ||
Pin Count 6 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature 40°C | ||
Operating Current 300μA | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS Compliant | ||
Automotive Standard No | ||
Series MIC2039 | ||
The Microchip High side MOSFET power distribution switch provides increased system reliability by using 5% current limit accuracy. It has an operating input voltage range from 2.5V to 5.5V, is internally current limited, and has thermal shutdown to protect the device and system. It is offered with either active-high or active-low logic level enable input controls. The device has an open drain fault status output flag with a built-in 32ms delay that asserts low during overcurrent or thermal shutdown conditions. The switch features an adjustable output current limit that is resistor programmable from 0.2A to 2.5A.
Soft start functionality
Undervoltage lockout
Fault status output flag
Logic controlled enable
Thermal shutdown