Power Integrations LNK606PG Flyback Converter 1, Off Liner Power Switch IC 7-Pin, DIP
- RS-stocknr.:
- 123-5393P
- Fabrikantnummer:
- LNK606PG
- Fabrikant:
- Power Integrations
Subtotaal 5 eenheden (geleverd in een buis)*
€ 4,90
(excl. BTW)
€ 5,95
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 775 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 5 + | € 0,98 |
*prijsindicatie
- RS-stocknr.:
- 123-5393P
- Fabrikantnummer:
- LNK606PG
- Fabrikant:
- Power Integrations
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Power Integrations | |
| Product Type | Power Switch IC | |
| Power Switch Type | Off Liner | |
| Power Switch Topology | Flyback Converter | |
| Number of Outputs | 5 | |
| Power Rating | 6.1W | |
| Number of Inputs | 1 | |
| Mount Type | Through Hole | |
| Package Type | DIP | |
| Maximum Supply Voltage | 700V | |
| Pin Count | 7 | |
| Maximum Operating Temperature | 150°C | |
| Operating Current | 600μA | |
| Minimum Operating Temperature | -40°C | |
| Height | 3.68mm | |
| Length | 9.83mm | |
| Width | 6.6mm | |
| Standards/Approvals | RoHS, EN55022 Class B | |
| Automotive Standard | No | |
| Series | LinkSwitch-II | |
| Alles selecteren | ||
|---|---|---|
Merk Power Integrations | ||
Product Type Power Switch IC | ||
Power Switch Type Off Liner | ||
Power Switch Topology Flyback Converter | ||
Number of Outputs 5 | ||
Power Rating 6.1W | ||
Number of Inputs 1 | ||
Mount Type Through Hole | ||
Package Type DIP | ||
Maximum Supply Voltage 700V | ||
Pin Count 7 | ||
Maximum Operating Temperature 150°C | ||
Operating Current 600μA | ||
Minimum Operating Temperature -40°C | ||
Height 3.68mm | ||
Length 9.83mm | ||
Width 6.6mm | ||
Standards/Approvals RoHS, EN55022 Class B | ||
Automotive Standard No | ||
Series LinkSwitch-II | ||
LinkSwitch-II, Power Integrations
The LinkSwitch-II dramatically simplifies low power CV/CC charger designs by eliminating an optocoupler and secondary control circuitry. The device introduces a revolutionary control technique to provide very tight output voltage and current regulation, compensating for transformer and internal parameter tolerances along with input voltage variations.,
Easily meets all global energy efficiency regulations
No-load consumption <200 mW at 230 VAC and down to below 30 mW with optional external bias
On/Off control provides constant efficiency down to very light loads – ideal for CEC and ENERGY STAR 2.0 regulations
No current sense resistors – maximizes efficiency