STMicroelectronics 1 Power Switch IC 10-Pin, SO
- RS-stocknr.:
- 188-8398P
- Fabrikantnummer:
- VN340SPTR-33-E
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 20 eenheden (geleverd op een doorlopende strip)*
€ 98,30
(excl. BTW)
€ 118,94
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 13 januari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 20 - 98 | € 4,915 |
| 100 - 198 | € 4,80 |
| 200 + | € 4,49 |
*prijsindicatie
- RS-stocknr.:
- 188-8398P
- Fabrikantnummer:
- VN340SPTR-33-E
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Power Switch IC | |
| Switch On Resistance RdsOn | 0.2Ω | |
| Number of Inputs | 1 | |
| Mount Type | Surface | |
| Package Type | SO | |
| Minimum Supply Voltage | 1V | |
| Pin Count | 10 | |
| Maximum Supply Voltage | 36V | |
| Operating Current | 1A | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | IEC 61131-2 | |
| Height | 3.3mm | |
| Length | 9.47mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Power Switch IC | ||
Switch On Resistance RdsOn 0.2Ω | ||
Number of Inputs 1 | ||
Mount Type Surface | ||
Package Type SO | ||
Minimum Supply Voltage 1V | ||
Pin Count 10 | ||
Maximum Supply Voltage 36V | ||
Operating Current 1A | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals IEC 61131-2 | ||
Height 3.3mm | ||
Length 9.47mm | ||
Automotive Standard No | ||
The VN340SP-33-E is a monolithic device developed using STMicroelectronics’ VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. The open drain diagnostic output indicates overtemperature conditions. Each I/O is pulled down when the overtemperature condition of the relative channel is verified.
Output current: 1 A per channel
Digital I/O clamped at 32 V minimum voltage
Shorted load and overtemperature protections
Protection against loss of ground
Built-in current limiter
Undervoltage shutdown
Open drain diagnostic output
Fast demagnetization of inductive loads