Infineon BTS3018TCATMA1 Low Side 1, Low Side Power Switch IC 3-Pin, TO-263

RS-stocknr.:: 229-1757
Fabrikantnummer:: BTS3018TCATMA1
Fabrikant:: Infineon

Infineon BTS3018TCATMA1 Low Side 1, Low Side Power Switch IC 3-Pin, TO-263

Subtotaal (1000 eenheden, op een rol van 1000)*

€ 3.984,00

(excl. BTW)

€ 4.821,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

1.000 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per rol*
1000 +	€ 3,984	€ 3.984,00

*prijsindicatie

RS-stocknr.:: 229-1757
Fabrikantnummer:: BTS3018TCATMA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Power Switch Topology	Low Side
	Power Switch Type	Low Side
	Product Type	Power Switch IC
	Switch On Resistance RdsOn	44mΩ
	Number of Outputs	2
	Number of Inputs	1
	Mount Type	Surface
	Package Type	TO-263
	Minimum Supply Voltage	2V
	Maximum Supply Voltage	60V
	Pin Count	3
	Maximum Operating Temperature	150°C
	Minimum Operating Temperature	-40°C
	Operating Current	6A
	Length	10mm
	Width	15mm
	Standards/Approvals	No
	Height	4.4mm
	Automotive Standard	AEC
	Series	HITFET

	Alles selecteren
	Merk Infineon
	Power Switch Topology Low Side
	Power Switch Type Low Side
	Product Type Power Switch IC
	Switch On Resistance RdsOn 44mΩ
	Number of Outputs 2
	Number of Inputs 1
	Mount Type Surface
	Package Type TO-263
	Minimum Supply Voltage 2V
	Maximum Supply Voltage 60V
	Pin Count 3
	Maximum Operating Temperature 150°C
	Minimum Operating Temperature -40°C
	Operating Current 6A
	Length 10mm
	Width 15mm
	Standards/Approvals No
	Height 4.4mm
	Automotive Standard AEC
	Series HITFET

Datasheet - BTS3018TCATMA1

Infineon HITFET Series Power Switch IC, 60V Maximum Supply Voltage, 6A Operating Current - BTS3018TCATMA1

This power switch IC is a low-side semiconductor designed for automotive applications meeting AEC expectations and intended for surface-mount deployment. It controls power flow in vehicle circuits across a broad supply range and supports dual-output switching with a single input, operating in demanding thermal conditions while handling moderate currents.

Features and Benefits:

• Low-side configuration enables controlled grounding of loads
• Handles up to 6 A operating current for moderate load demands
• Operates from 2 V to 60 V to accommodate varied vehicle rails
• Low RDS(on) of 44 mΩ reduces conduction losses
• Rated for −40 °C to 150 °C to tolerate extreme temperatures
• Surface-mount TO-263 package simplifies automated assembly

Applications

• Suitable for switching automotive lighting and signalling loads
• Ideal for controlling small motors and actuators in vehicles
• Used with multiplexed body control modules for dual outputs
• Can be used for protection and load-disconnect functions
• Suitable for junction-box and power-distribution modules

How many external control lines are required to operate it?

It uses one input to govern two separate outputs.

What pin count should designers allocate on the PCB footprint?

The component requires a 3-pin footprint for electrical connections.

What mounting style is needed during assembly?

It requires surface-mounted placement compatible with TO-263 soldering.

What physical envelope should be allowed for thermal management?

Allow for a component measuring 15 mm by 10 mm with 4.4 mm height in the layout.

What topology does it implement for load switching?

It implements a low-side switching topology for grounding loads.