ROHM BV1LF080EFJ-CE2 Low Side 1, Low Side Power Switch IC 8-Pin, HTSOP-J
- RS-stocknr.:
- 235-2649
- Fabrikantnummer:
- BV1LF080EFJ-CE2
- Fabrikant:
- ROHM
Subtotaal (1 rol van 2500 eenheden)*
€ 1.737,50
(excl. BTW)
€ 2.102,50
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 0,695 | € 1.737,50 |
*prijsindicatie
- RS-stocknr.:
- 235-2649
- Fabrikantnummer:
- BV1LF080EFJ-CE2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Power Switch Type | Low Side | |
| Product Type | Power Switch IC | |
| Power Switch Topology | Low Side | |
| Switch On Resistance RdsOn | 80mΩ | |
| Number of Outputs | 1 | |
| Number of Inputs | 1 | |
| Interface Type | CMOS | |
| Mount Type | Surface | |
| Package Type | HTSOP-J | |
| Minimum Supply Voltage | 3.5V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 6.5V | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 7.5A | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | RoHS | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Power Switch Type Low Side | ||
Product Type Power Switch IC | ||
Power Switch Topology Low Side | ||
Switch On Resistance RdsOn 80mΩ | ||
Number of Outputs 1 | ||
Number of Inputs 1 | ||
Interface Type CMOS | ||
Mount Type Surface | ||
Package Type HTSOP-J | ||
Minimum Supply Voltage 3.5V | ||
Pin Count 8 | ||
Maximum Supply Voltage 6.5V | ||
Minimum Operating Temperature -40°C | ||
Operating Current 7.5A | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals RoHS | ||
Automotive Standard AEC-Q100 | ||
The ROHM 1 channel low-side switch for automotive application. Output slew rate are variably controlled by external resistance of the SR terminal. It has built-in OCP, dual TSD and Active clamp function. It is equipped with output diagnostic function for TSD.
Built-in diagnostic function
Built-in slew rate control function
Directly controllable from CMOS logic Ics
AEC-Q100 qualified