ROHM Low Side, Low Side Power Switch IC 8-Pin, HTSOP-J8
- RS-stocknr.:
- 246-3886
- Fabrikantnummer:
- BV1LA025EFJ-CE2
- Fabrikant:
- ROHM
Subtotaal (1 rol van 2500 eenheden)*
€ 2.210,00
(excl. BTW)
€ 2.675,00
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 0,884 | € 2.210,00 |
*prijsindicatie
- RS-stocknr.:
- 246-3886
- Fabrikantnummer:
- BV1LA025EFJ-CE2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Power Switch Type | Low Side | |
| Product Type | Power Switch IC | |
| Power Switch Topology | Low Side | |
| Switch On Resistance RdsOn | 25mΩ | |
| Number of Outputs | 5 | |
| Mount Type | Surface | |
| Package Type | HTSOP-J8 | |
| Minimum Supply Voltage | 3.5V | |
| Maximum Supply Voltage | 5.5V | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 170μA | |
| Width | 3.9 mm | |
| Height | 1mm | |
| Length | 4.9mm | |
| Standards/Approvals | JESD51-2A | |
| Series | BV1LA025EFJ-C | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Power Switch Type Low Side | ||
Product Type Power Switch IC | ||
Power Switch Topology Low Side | ||
Switch On Resistance RdsOn 25mΩ | ||
Number of Outputs 5 | ||
Mount Type Surface | ||
Package Type HTSOP-J8 | ||
Minimum Supply Voltage 3.5V | ||
Maximum Supply Voltage 5.5V | ||
Pin Count 8 | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Operating Current 170μA | ||
Width 3.9 mm | ||
Height 1mm | ||
Length 4.9mm | ||
Standards/Approvals JESD51-2A | ||
Series BV1LA025EFJ-C | ||
Automotive Standard AEC-Q100 | ||
The ROHM BV1 series is an automotive low side switch IC which are available in HTSOP-J8 package, has built-in Dual TSD, OCP and active clamp function and can be used driving resistive, inductive and capacitive load applications.
Built-in dual TSD
AEC-Q100 qualified
Built-in over current protection function(OCP)
Built-in active clamp function
Direct control enabled from CMOS logic IC, etc.