ROHM High Side, High Side Power Switch IC 8-Pin, HTSOP-J8
- RS-stocknr.:
- 267-2266P
- Fabrikantnummer:
- BD1HCU50EFJ-CE2
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 51,80
(excl. BTW)
€ 62,70
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 26 februari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 95 | € 1,036 |
| 100 - 245 | € 0,854 |
| 250 - 995 | € 0,80 |
| 1000 + | € 0,624 |
*prijsindicatie
- RS-stocknr.:
- 267-2266P
- Fabrikantnummer:
- BD1HCU50EFJ-CE2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Power Switch Type | High Side | |
| Product Type | Power Switch IC | |
| Power Switch Topology | High Side | |
| Switch On Resistance RdsOn | 500mΩ | |
| Package Type | HTSOP-J8 | |
| Minimum Supply Voltage | 4V | |
| Maximum Supply Voltage | 18V | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -55°C | |
| Operating Current | 3mA | |
| Width | 4.9mm | |
| Height | 1mm | |
| Length | 6mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | AEC-Q100 | |
| Series | BD1HxU50 | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Power Switch Type High Side | ||
Product Type Power Switch IC | ||
Power Switch Topology High Side | ||
Switch On Resistance RdsOn 500mΩ | ||
Package Type HTSOP-J8 | ||
Minimum Supply Voltage 4V | ||
Maximum Supply Voltage 18V | ||
Pin Count 8 | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -55°C | ||
Operating Current 3mA | ||
Width 4.9mm | ||
Height 1mm | ||
Length 6mm | ||
Standards/Approvals RoHS | ||
Automotive Standard AEC-Q100 | ||
Series BD1HxU50 | ||
The ROHM BD1HCU50EFJ-C is an automotive 1ch high-side switch. It has a built-in overcurrent protection circuit, thermal shut down circuit, open load detection circuit, under voltage lock out circuit, and has diagnostic output function at the time during abnormal detection. This IC uses different production line against series model BD1HC500EFJ-C for the purpose of improving production efficiency.
Built-in overcurrent protection circuit
Low standby current
1ch High-side switch for the mechanical relay coil drive