ROHM BD1HDU50EFJ-CE2 High Side, High Side Power Switch IC 8-Pin, HTSOP-J8
- RS-stocknr.:
- 267-2267
- Fabrikantnummer:
- BD1HDU50EFJ-CE2
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Subtotaal (1 rol van 2500 eenheden)*
€ 1.715,00
(excl. BTW)
€ 2.075,00
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 - 2500 | € 0,686 | € 1.715,00 |
| 5000 + | € 0,629 | € 1.572,50 |
*prijsindicatie
- RS-stocknr.:
- 267-2267
- Fabrikantnummer:
- BD1HDU50EFJ-CE2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Power Switch Type | High Side | |
| Product Type | Power Switch IC | |
| Power Switch Topology | High Side | |
| Switch On Resistance RdsOn | 500mΩ | |
| Minimum Supply Voltage | 4V | |
| Package Type | HTSOP-J8 | |
| Maximum Supply Voltage | 18V | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -55°C | |
| Operating Current | 3mA | |
| Length | 6mm | |
| Height | 1mm | |
| Standards/Approvals | RoHS | |
| Series | BD1HxU50 | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Power Switch Type High Side | ||
Product Type Power Switch IC | ||
Power Switch Topology High Side | ||
Switch On Resistance RdsOn 500mΩ | ||
Minimum Supply Voltage 4V | ||
Package Type HTSOP-J8 | ||
Maximum Supply Voltage 18V | ||
Pin Count 8 | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -55°C | ||
Operating Current 3mA | ||
Length 6mm | ||
Height 1mm | ||
Standards/Approvals RoHS | ||
Series BD1HxU50 | ||
Automotive Standard AEC-Q100 | ||
The ROHM BD1HDU50EFJ-C is an automotive 1ch high-side switch. It has a built-in overcurrent protection circuit, thermal shut down circuit, open load detection circuit, under voltage lock out circuit, and has diagnostic output function at the time during abnormal detection. This IC uses different production line against series model BD1HD500EFJ-C for the purpose of improving production efficiency.
Built-in overcurrent protection circuit
Low standby current
1ch High-side switch for the mechanical relay Coil drive