3M™ Cartridge Filter P2/P3 Particulate is one of the 3M 6000 series of filters that are applicable for use in a variety of environments.
Features and Benefits
• 3M™ Particulate Cartridge Filters, 6000 Series • Solid top design reduced chance of premature clogging • Unique easy to check seal promotes enhanced respirator fit • High temperature cover protects filter media from heat, sparks or physical damage • Low breathing resistance • Bayonet fitting ensures for a safer locking
P2 /P3 Particulate Filter 6035
Protection from all particulates including highly toxic particulates and against particulates at levels up to 10 x the Exposure Standard on a half face mask and up to 100 x the Exposure Standard on a full face mask.
P2 /P3 Particulate Filter 6038
Protection against particulates at levels up to 10 x the Exposure Standard on a half face mask and up to 100 x the Exposure Standard on a full face mask. Is also recommended for use against hydrogen fluoride (HF) up to 30 ppm and other acid gases such as chlorine or sulphur dioxide and organic vapours.
Applications
Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as;
• A- Organic vapours with a boiling point more than 65°C • B- Inorganic vapours • E- Acid gases • K- Ammonia and ammonia derivatives • AX- Organic vapours with a boiling point less than 65°C
Half-mask or full-mask respirators?
Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.
However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.
Correct use of respirators
When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.
Note
The 3M™ Cartridge Filter provides P3 protection only with full facepiece respirator. Provides P2 protection with half facepiece respirator.
