Festo, 27 mm R 1/8 In-line Installation Pressure Gauge, 16 bar

RS-stocknr.:: 288-7766
Fabrikantnummer:: MA-27-16-R1/8
Fabrikant:: Festo

Festo, 27 mm R 1/8 In-line Installation Pressure Gauge, 16 bar

Subtotaal (1 eenheid)*

€ 16,12

(excl. BTW)

€ 19,51

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

30 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 16,12

*prijsindicatie

RS-stocknr.:: 288-7766
Fabrikantnummer:: MA-27-16-R1/8
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Product Type	Pressure Gauge
	Maximum Pressure Measurement	16bar
	Minimum Pressure Measurement	0bar
	Pressure Connection	Pneumatic Connection R1/8
	Connection Size	R 1/8
	Accuracy	4 %
	Connection Type	In-line Installation
	Series	MA-27-16-R1/8
	Case Material	Steel
	Connection Location	Rear Side Centred
	Dial Size	27mm
	Dial Colour	Black
	Maximum Operating Temperature	60°C
	Standards/Approvals	Zone 1 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX), Zone 2 (ATEX)
	Model Number	541733

	Alles selecteren
	Merk Festo
	Product Type Pressure Gauge
	Maximum Pressure Measurement 16bar
	Minimum Pressure Measurement 0bar
	Pressure Connection Pneumatic Connection R1/8
	Connection Size R 1/8
	Accuracy 4 %
	Connection Type In-line Installation
	Series MA-27-16-R1/8
	Case Material Steel
	Connection Location Rear Side Centred
	Dial Size 27mm
	Dial Colour Black
	Maximum Operating Temperature 60°C
	Standards/Approvals Zone 1 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX), Zone 2 (ATEX)
	Model Number 541733

Land van herkomst:: PL

Festo MA-27-16-R1/8 Series Pressure Gauge, 16 Bar Maximum Pressure Measurement, 27mm Dial Size - MA-27-16-R1/8

This pressure gauge is a compact instrument designed to monitor low pneumatic pressures in industrial and hazardous environments. It provides a clear visual reading for processes where confined installation and zoned explosion protection are required, and is intended for inline mounting with the pressure inlet at the rear centre.

Features and Benefits:

• 4% accuracy gives dependable indication for routine monitoring
• Measures from 0 to 16 bar for low-pressure systems
• R1/8 pneumatic connection enables straightforward tube integration
• 27mm dial offers compact yet legible pressure display
• Steel case resists mechanical impact in industrial settings
• Rated to operate up to 60°C for warm process applications

Applications

• Suitable for compressed-air plant pressure checks
• Ideal for pneumatic actuator supply line monitoring
• Used with control panels requiring compact gauges
• Can be used for filter and regulator inspection points
• Appropriate for installations inside zoned hazardous areas

How is the gauge mounted within a pneumatic line?

It is intended for in-line installation with the connection located centrally at the rear, allowing straightforward rear-threaded connection into R1/8 ports.

What certification makes this gauge appropriate for explosive atmospheres?

It carries approvals applicable to Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, permitting use where explosive gases or dust may be present.

What temperature limitations should be observed during operation?

The maximum permitted operating temperature is 60°C, so it should not be installed in locations that routinely exceed this limit.

How does the case material affect durability in industrial use?

The steel enclosure provides enhanced mechanical protection against knocks and abrasion common in workshop and plant environments.