Honeywell HSCDANN001BG2A5 Gauge Pressure SensorSurface 8 DIP

RS-stocknr.:: 211-9917
Fabrikantnummer:: HSCDANN001BG2A5
Fabrikant:: Honeywell

Honeywell HSCDANN001BG2A5 Gauge Pressure SensorSurface 8 DIP

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 47,72

(excl. BTW)

€ 57,74

(incl. BTW)

Voeg 2 eenheden toe voor gratis bezorging

Bestellingen onder € 75,00 (excl. BTW) € 5,95.

Wordt opgeheven

Laatste 3 stuk(s), klaar voor verzending vanaf een andere locatie

Aantal stuks	Per stuk
1 - 4	€ 47,72
5 - 9	€ 40,47
10 - 24	€ 38,09
25 - 39	€ 35,69
40 +	€ 35,17

*prijsindicatie

RS-stocknr.:: 211-9917
Fabrikantnummer:: HSCDANN001BG2A5
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Maximum Overload Pressure	200kPa
	Product Type	Gauge Pressure Sensor
	Sensor Type	Gauge Pressure Sensor
	Mount Type	Surface
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	5V
	Maximum Operating Pressure	100 kPa
	Port Type	Single Axial Barbed
	Accuracy	±0.25 %
	Maximum Supply Voltage	6V
	Maximum Operating Temperature	85°C
	Series	HSC
	Width	13.3 mm
	Length	10mm
	Height	13.75mm
	Standards/Approvals	No
	Maximum Output Voltage	3.3V
	Minimum Operating Pressure	0bar
	Minimum Operating Temperature	-25°C
	Automotive Standard	No

	Alles selecteren
	Merk Honeywell
	Maximum Overload Pressure 200kPa
	Product Type Gauge Pressure Sensor
	Sensor Type Gauge Pressure Sensor
	Mount Type Surface
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 5V
	Maximum Operating Pressure 100 kPa
	Port Type Single Axial Barbed
	Accuracy ±0.25 %
	Maximum Supply Voltage 6V
	Maximum Operating Temperature 85°C
	Series HSC
	Width 13.3 mm
	Length 10mm
	Height 13.75mm
	Standards/Approvals No
	Maximum Output Voltage 3.3V
	Minimum Operating Pressure 0bar
	Minimum Operating Temperature -25°C
	Automotive Standard No

Datasheet - HSCDANN001BG2A5

Honeywell Pressure Sensor, PCB Mount, 100kPa - HSC Series - HSCDANN001BG2A5

Mount this Honeywell pressure sensor onto a printed circuit board (PCB) to accurately measure the pressure of gases and liquids. This component is piezo-resistive, so it uses thin sections of silicon to detect minute changes in electrical resistance. Thanks to its DIP (dual in-line package) pin setup with eight pins arranged in parallel rows, mounting onto PCBs is quick and simple. It also offers full analogue and digital output so you can take readings easily. You can use this component for a variety of applications, such as monitoring dynamic pressure changes in pyrotechnic devices.

Features & Benefits

• Maximum operating pressure of 100kPa for use in most everyday operating conditions

• Maximum overload pressure of 200kPa for added safety

Applications

• Haemodialysis machines

• Ventilators

• Gas flow and air pressure measurement

How can I protect this pressure sensor against failure?

Pressure sensors can fail due to mechanical damage, as well as electrical overload from lighting, a misconnection during maintenance or a tripped circuit. This means it's important to protect your circuit against electrical hazards. Moisture and chemicals can also cause the pressure sensor to fail or give an inaccurate reading, so it's important to protect the sensor from harsh conditions when possible.