Honeywell Technologies ABPDANN060PGAA5 Pressure SensorBoard 6 DIP

RS-stocknr.:: 214-1393
Fabrikantnummer:: ABPDANN060PGAA5
Fabrikant:: Honeywell

Honeywell Technologies ABPDANN060PGAA5 Pressure SensorBoard 6 DIP

Subtotaal (1 doos van 50 eenheden)*

€ 1.835,40

(excl. BTW)

€ 2.220,85

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 100 stuk(s) vanaf 26 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Doos*
50 +	€ 36,708	€ 1.835,40

*prijsindicatie

RS-stocknr.:: 214-1393
Fabrikantnummer:: ABPDANN060PGAA5
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Maximum Overload Pressure	250psi
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	6
	Minimum Supply Voltage	-0.3V
	Maximum Operating Pressure	60 psi
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Port Type	Single Axial Barbed
	Maximum Operating Temperature	+85°C
	Height	3.63mm
	Width	6.3mm
	Standards/Approvals	BPA Free, LFGB, NSF-169
	Length	7.3mm
	Series	ABP
	Minimum Operating Pressure	0psi
	Minimum Operating Temperature	-40°C
	Automotive Standard	ISO 9001

	Alles selecteren
	Merk Honeywell
	Maximum Overload Pressure 250psi
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 6
	Minimum Supply Voltage -0.3V
	Maximum Operating Pressure 60 psi
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Port Type Single Axial Barbed
	Maximum Operating Temperature +85°C
	Height 3.63mm
	Width 6.3mm
	Standards/Approvals BPA Free, LFGB, NSF-169
	Length 7.3mm
	Series ABP
	Minimum Operating Pressure 0psi
	Minimum Operating Temperature -40°C
	Automotive Standard ISO 9001

Datasheet-ABPDANN060PGAA5

Honeywell ABP Series Gauge Pressure Sensor, 60psi Maximum Operating Pressure, ±0.25% Accuracy - ABPDANN060PGAA5

This gauge pressure sensor is a Compact board-mounted device designed to convert pressure into a ratiometric electrical output for measurement and control tasks. It is intended for use with non-corrosive gases or, in specific options, with non-corrosive liquids where condensation may occur. The sensor provides calibrated, temperature-compensated readings and is suitable for low-voltage systems within industrial, medical and commercial electronic assemblies.

Features and Benefits:

• ±0.25% accuracy pressure sensor provides precise measurement
• High overload capacity offers 250psi maximum overload protection
• Low-voltage 5V pressure sensor supports 3.3V or 5.0V supplies
• 6-pin DIP barbed pressure sensor simplifies PCB board mounting
• High temp -40 to 85°C pressure sensor maintains performance over range
• NSF-169 BPA free pressure sensor meets food-safe material options

Applications

• Suitable for CPAP and ventilator pressure monitoring
• Ideal for pneumatic control and valve positioning systems
• Used for process gas monitoring in industrial plants
• Can be used with coffee machines and washing machines
• Suitable for blood-analysis and drug-dosing instrumentation

What output options are available?

The device offers ratiometric analogue or 12-bit digital outputs compatible with I2C or SPI interfaces and updates calibrated pressure values at approximately 1kHz for analogue and 2kHz for digital.

Which media can be measured when liquid option is selected?

With the liquid-media option an additional silicone-based gel protects electronics, enabling use with non-corrosive liquids such as water and saline and permitting wet-wet differential sensing on dual-ported devices.

How is long-term measurement stability addressed?

Long-term stability is specified as ±0.25%FSS over 1000hr at 25°C and the sensor is calibrated and temperature-compensated for offset, sensitivity and thermal effects.

What environmental and mechanical tolerances does it have?

It tolerates vibration to 15g and shock to 100g, operates over -40 to 85°C storage range, and meets IPC/JEDEC J-STD-020E Moisture Sensitivity Level 2 for soldering.

Which certifications apply to food-contact material options?

The sensor’s wetted-material options have been tested and certified to NSF-169, LFGB and are BPA free.