Honeywell HSCDANN160MGAA5 Piezoresistive Pressure SensorThrough Hole 8 DIP
- RS-stocknr.:
- 226-9648
- Fabrikantnummer:
- HSCDANN160MGAA5
- Fabrikant:
- Honeywell
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 46,33
(excl. BTW)
€ 56,06
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 143 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 46,33 |
| 10 - 24 | € 44,01 |
| 25 - 49 | € 42,86 |
| 50 + | € 41,79 |
*prijsindicatie
- RS-stocknr.:
- 226-9648
- Fabrikantnummer:
- HSCDANN160MGAA5
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Sensor Type | Piezoresistive Pressure Sensor | |
| Maximum Overload Pressure | 85kPa | |
| Product Type | Piezoresistive Pressure Sensor | |
| Mount Type | Through Hole | |
| Package Type | DIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 16 kPa | |
| Accuracy | ±0.25 % | |
| Port Type | Single Axial Barbed | |
| Maximum Supply Voltage | 5V | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Width | 13.3 mm | |
| Series | HSC | |
| Height | 13.75mm | |
| Length | 10mm | |
| Minimum Operating Pressure | 0mbar | |
| Minimum Operating Temperature | -20°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Sensor Type Piezoresistive Pressure Sensor | ||
Maximum Overload Pressure 85kPa | ||
Product Type Piezoresistive Pressure Sensor | ||
Mount Type Through Hole | ||
Package Type DIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 16 kPa | ||
Accuracy ±0.25 % | ||
Port Type Single Axial Barbed | ||
Maximum Supply Voltage 5V | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Width 13.3 mm | ||
Series HSC | ||
Height 13.75mm | ||
Length 10mm | ||
Minimum Operating Pressure 0mbar | ||
Minimum Operating Temperature -20°C | ||
Automotive Standard No | ||
The Honeywell HSC series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non linearity using an on board Application Specific Integrated Circuit. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.
Promotes system reliability and reduces potential system downtime
Allows ultra low pressure sensors to be used continuously well above the calibrated pressure range
Detects most internal failures including burst sensors
Enables extended battery life
Gerelateerde Links
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 85kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor Surface Mount 60kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Surface Mount 85kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Surface Mount 85kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 60kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 85kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 85kPa Overload Max, DIP
- Honeywell Gauge Pressure Sensor PCB Mount 85kPa Overload Max, DIP
