Honeywell Technologies HSCMAND600MG2A3 Pressure SensorBoard 8 SMT

RS-stocknr.:: 226-9674
Fabrikantnummer:: HSCMAND600MG2A3
Fabrikant:: Honeywell

Honeywell Technologies HSCMAND600MG2A3 Pressure SensorBoard 8 SMT

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 56,51

(excl. BTW)

€ 68,38

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 9	€ 56,51
10 - 24	€ 46,90
25 - 49	€ 44,98
50 +	€ 42,72

*prijsindicatie

RS-stocknr.:: 226-9674
Fabrikantnummer:: HSCMAND600MG2A3
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Maximum Overload Pressure	200kPa
	Mount Type	Board
	Package Type	SMT
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	60 kPa
	Port Type	Single Axial Barbed
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	+85°C
	Series	HSC
	Standards/Approvals	ISO 9001
	Length	10mm
	Height	13.75mm
	Width	13.3mm
	Minimum Operating Pressure	0mbar
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-20°C

	Alles selecteren
	Merk Honeywell
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Maximum Overload Pressure 200kPa
	Mount Type Board
	Package Type SMT
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 60 kPa
	Port Type Single Axial Barbed
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Maximum Operating Temperature +85°C
	Series HSC
	Standards/Approvals ISO 9001
	Length 10mm
	Height 13.75mm
	Width 13.3mm
	Minimum Operating Pressure 0mbar
	Automotive Standard ISO 9001
	Minimum Operating Temperature -20°C

Datasheet - HSCMAND600MG2A3

Honeywell HSC Series Piezoresistive Pressure Sensor, 60kPa Maximum Operating Pressure, ±0.25% Accuracy - HSCMAND600MG2A3

This pressure sensor is a piezoresistive board-mount device designed to measure absolute, gauge or differential pressure in non-corrosive, non-ionic gases and, for select ranges, compatible liquids on Port 1. It is supplied as a calibrated, temperature-compensated transducer with ratiometric analogue or 14-bit digital outputs and is intended for Compact PCB integration where high stability and low power consumption are required.

Features and Benefits:

• ±0.25%FSS BFSL accuracy reduces calibration effort
• Operates from a single 3.3V or 5V supply for flexible designs
• Output updated at approximately 1kHz analogue and 2kHz digital
• Compensated over 0°C to 50°C for consistent performance
• Survives up to 200kPa overload for robust system protection
• Low power consumption <10mW enables extended battery use

Applications

• Suitable for medical respiratory monitoring and ventilators
• Used with HVAC transmitters and clogged-filter detection systems
• Ideal for gas-flow instrumentation and chromatography analysers
• Can be used for industrial barometry and flow calibrators
• Suitable for pneumatic control and VAV building systems

What electrical interfaces are available?

The device provides ratiometric analogue output and digital SPI or I2C options with 12-14-bit resolution depending on digital selection.

What environmental temperatures can it tolerate for operation?

It operates from -20°C to 85°C and is characterised for compensated output within 0°C to 50°C.

How are liquids handled by the sensor?

Liquid-media options are available for Port1 only and are limited to pressure ranges ≥60mbar with precautions against particulates and residue.

What package and mounting formats exist?

It is offered in SMT and other board-mount packages, including an 8-pin SMT layout for surface mounting.

How does it maintain long-term measurement stability?

On-board ASIC calibration and compensation minimise drift, reducing the need for frequent system recalibration.