Honeywell Technologies SSCDANN150PG2A3 Piezoresistive Pressure SensorThrough Hole 8 DIP

RS-stocknr.:: 226-9723
Fabrikantnummer:: SSCDANN150PG2A3
Fabrikant:: Honeywell

Honeywell Technologies SSCDANN150PG2A3 Piezoresistive Pressure SensorThrough Hole 8 DIP

Subtotaal (1 doos van 50 eenheden)*

€ 3.730,75

(excl. BTW)

€ 4.514,20

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 08 januari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Doos*
50 +	€ 74,615	€ 3.730,75

*prijsindicatie

RS-stocknr.:: 226-9723
Fabrikantnummer:: SSCDANN150PG2A3
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Maximum Overload Pressure	1723kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Piezoresistive Pressure Sensor
	Mount Type	Through Hole
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	1034 kPa
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Single Axial Barbed
	Maximum Operating Temperature	85°C
	Standards/Approvals	No
	Series	SSC
	Length	10mm
	Height	13.75mm
	Minimum Operating Pressure	0psi
	Automotive Standard	No
	Minimum Operating Temperature	-40°C

	Alles selecteren
	Merk Honeywell
	Maximum Overload Pressure 1723kPa
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Piezoresistive Pressure Sensor
	Mount Type Through Hole
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 1034 kPa
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Single Axial Barbed
	Maximum Operating Temperature 85°C
	Standards/Approvals No
	Series SSC
	Length 10mm
	Height 13.75mm
	Minimum Operating Pressure 0psi
	Automotive Standard No
	Minimum Operating Temperature -40°C

Datasheet - SSCDANN150PG2A3

Honeywell SSC Series Piezoresistive Pressure Sensor, 0 to 1034kPa Operating Range, ±0.25% Accuracy - SSCDANN150PG2A3

This piezoresistive pressure sensor is a Compact through-hole DIP device that converts pressure into a measurable electrical signal for instrumentation and control. It operates across a broad pressure range up to 1034kPa and functions from low-voltage supplies, making it suitable for integration into systems requiring precise pressure monitoring within typical ambient and industrial temperatures.

Features and Benefits:

• 0 to 1034kPa range for wide measurement coverage
• ±0.25% accuracy to support precise control loops
• 3.3V minimum supply for low-voltage system compatibility
• 8-pin pinout for straightforward connection and routing
• Single axial barbed port for secure fluid coupling

Applications

• Suitable for closed-loop pneumatic pressure monitoring
• Ideal for laboratory test rigs requiring fine resolution
• Used with low-voltage data acquisition systems
• Can be used for fluid line sampling in bench setups
• Used for component-level integration on test fixtures

What electrical supply limits should be observed?

Operate the device between 3.3V and 5V to remain within specified supply limits.

What environmental temperatures can it tolerate during operation?

It functions across an operating range from -40°C up to 85°C, suitable for moderate thermal conditions.

How robust is the sensor to pressure excursions above normal range?

It can withstand transient overloads up to 1723kPa without immediate failure.

What mounting and package format does it use for PCB assembly?

The sensor is supplied in a through-hole DIP package intended for standard board mounting.

What physical footprint should be allowed when designing around the sensor?

Allow for its Compact envelope measuring 13.5mm width, 13.75mm height and 10mm length.