Infineon KP234XTMA1 Barometric Pressure SensorSurface 8 PG-DSOF-8-16

RS-stocknr.:: 259-1568
Fabrikantnummer:: KP234XTMA1
Fabrikant:: Infineon

Infineon KP234XTMA1 Barometric Pressure SensorSurface 8 PG-DSOF-8-16

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 4,92

(excl. BTW)

€ 5,95

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

929 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 49	€ 4,92
50 - 99	€ 3,05
100 - 249	€ 2,98
250 - 499	€ 2,89
500 +	€ 2,83

*prijsindicatie

RS-stocknr.:: 259-1568
Fabrikantnummer:: KP234XTMA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Product Type	Barometric Pressure Sensor
	Sensor Type	Barometric Pressure Sensor
	Typical Sensitivity	45mV/kPa
	Mount Type	Surface
	Package Type	PG-DSOF-8-16
	Pin Count	8
	Minimum Supply Voltage	4.5V
	Maximum Operating Pressure	115 kPa
	Accuracy	±1.5 kPa
	Maximum Supply Voltage	5.5V
	Maximum Operating Temperature	125°C
	Series	KP234
	Maximum Output Voltage	4.7V
	Height	2.8mm
	Length	7mm
	Standards/Approvals	RoHS
	Width	8.6mm
	Minimum Operating Pressure	40kPa
	Minimum Output Voltage	200mV
	Minimum Operating Temperature	-40°C
	Automotive Standard	AEC

	Alles selecteren
	Merk Infineon
	Product Type Barometric Pressure Sensor
	Sensor Type Barometric Pressure Sensor
	Typical Sensitivity 45mV/kPa
	Mount Type Surface
	Package Type PG-DSOF-8-16
	Pin Count 8
	Minimum Supply Voltage 4.5V
	Maximum Operating Pressure 115 kPa
	Accuracy ±1.5 kPa
	Maximum Supply Voltage 5.5V
	Maximum Operating Temperature 125°C
	Series KP234
	Maximum Output Voltage 4.7V
	Height 2.8mm
	Length 7mm
	Standards/Approvals RoHS
	Width 8.6mm
	Minimum Operating Pressure 40kPa
	Minimum Output Voltage 200mV
	Minimum Operating Temperature -40°C
	Automotive Standard AEC

Datasheet - KP234XTMA1

Infineon KP234 Series Barometric Pressure Sensor, 40 to 115kPa Operating Range, ±1.5kPa Accuracy - KP234XTMA1

This barometric pressure sensor measures atmospheric pressure for automotive applications and related systems. It operates across a defined pressure span suitable for altitude and environment sensing while complying with automotive-quality construction and RoHS limits. The component is intended for surface-mounted assemblies and accepts a standard low-voltage supply.

Features and Benefits:

• 45mV/kPa sensitivity provides clear analogue conversion for control systems
• 4.5 to 5.5V supply range enables compatibility with common vehicle voltages
• ±1.5kPa accuracy supports precise pressure-based calculations
• -40°C to 125°C temperature tolerance permits high-temperature deployment
• AEC automotive standardisation ensures suitability for vehicle electronics

Applications

• Suitable for intake-air pressure compensation in engine systems
• Ideal for cabin altitude regulation and climate-control loops
• Used for environmental monitoring in telematics modules
• Can be used for barometric correction in navigation devices

What packaging and mounting approach does it use?

The device is supplied in a PG-DSOF-8-16 package and is intended for surface mounting.

How many electrical connections are available and what is the output range?

It provides eight pins and an output that spans approximately 0.2V to 4.7V depending on pressure.

What supply voltages are acceptable for operation?

The unit functions with supply voltages from 4.5V up to a maximum of 5.5V.

What pressure extremes can it measure reliably?

It operates over a minimum pressure of 40kPa up to a maximum of 115kPa.

Are there environmental certifications or limits to note?

The component meets RoHS requirements and is rated for operation between -40°C and 125°C.