KIMO PST-11 Series Pressure Sensor, Relay Output -100 Pa 100 Pa, Differential Reading
- RS-stocknr.:
- 276-9887
- Fabrikantnummer:
- PST-11
- Fabrikant:
- KIMO
Subtotaal (1 eenheid)*
€ 345,11
(excl. BTW)
€ 417,58
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 5 stuk(s) vanaf 11 mei 2026
- Plus verzending 5 stuk(s) vanaf 25 mei 2026
- Plus verzending 5 stuk(s) vanaf 01 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 345,11 |
*prijsindicatie
- RS-stocknr.:
- 276-9887
- Fabrikantnummer:
- PST-11
- Fabrikant:
- KIMO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | KIMO | |
| Maximum Pressure Measurement | 100Pa | |
| Pressure Reading Type | Differential | |
| Product Type | Pressure Sensor | |
| Minimum Pressure Measurement | -100Pa | |
| Accuracy | ±1 % | |
| Output Type | Relay | |
| Response Time | 0.3s | |
| Series | PST-11 | |
| Housing Material | ABS | |
| Standards/Approvals | 2012/19/EU WEEE, 2014/30/EU EMC, 2011/65/EU RoHS II, 2014/35/EU Low Voltage | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 70°C | |
| IP Rating | IP65 | |
| Alles selecteren | ||
|---|---|---|
Merk KIMO | ||
Maximum Pressure Measurement 100Pa | ||
Pressure Reading Type Differential | ||
Product Type Pressure Sensor | ||
Minimum Pressure Measurement -100Pa | ||
Accuracy ±1 % | ||
Output Type Relay | ||
Response Time 0.3s | ||
Series PST-11 | ||
Housing Material ABS | ||
Standards/Approvals 2012/19/EU WEEE, 2014/30/EU EMC, 2011/65/EU RoHS II, 2014/35/EU Low Voltage | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 70°C | ||
IP Rating IP65 | ||
A manostat is a pressure gauge which has a switch inside its casing. At a selected pressure the switch activates an electrical contact and stops the machine on which it is wired.
PST-11 is used to control pressure from -100 to +100 Pa.
Gerelateerde Links
- KIMO, Relay Output 1000 Pa
- KIMO, Analogue Output 100 Pa
- KIMO, Analogue Output 1000 Pa
- KIMO CP212 Series Pressure Sensor Differential Reading
- KIMO TX50 E6 PA Differential Manometer With 2 Pressure Port/s, Max Pressure Measurement 50 Pa
- KIMO VH50 E6 PA Differential Manometer With 2 Pressure Port/s, Max Pressure Measurement 500 Pa
- KIMO HP5 E6 PA Differential Manometer With 2 Pressure Port/s, Max Pressure Measurement 50 Pa
- KIMO MG50 E6 PA Differential Manometer With 2 Pressure Port/s, Max Pressure Measurement 500 Pa
