Xylem Process Pump Controller, 415 V ac, IP55

  • RS-stocknr. 144-9307
  • Fabrikantnummer 10073LDAA
  • Fabrikant Xylem
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DK
Productomschrijving

Hydrovar Pump Controller

Hydrovar is an intelligent controller that matches pump performance to demand. The pump controller controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. The Hydrovar controller can be easily fitted to any pump system using the fast and easy ""clip and play"" mounting clamps.

Features and Benefits

Energy savings of up to 70% Automatic test starts
Auto cyclic change of lead and lag pump units
A memory for any inverter fault signals
Operating hours run counter
Two levels of password protection if required
Stopping the pump if there is water failure
Protection against dry running

Product Application Information

Fire fighting Food and beverage
Geothermal
Irrigation / Agricultural
Domestic / Industrial water supply
Municipal water supply
HVAC
Water displays / Fountains / Features
Mining / Drainage / Dewatering

Xylem

Specificaties
Kenmerk Waarde
Supply Voltage 415 V ac
IP Rating IP55
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
2.054,27
(excl. BTW)
2.485,67
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.054,27
Related Products
The MultiTrode indicator probe provides continuous level indication ...
Description:
The MultiTrode indicator probe provides continuous level indication and pump control. The probe can be connected to a PLC or dedicated pump controller system. The 10 digital outputs provide a mechanism for simple pump control without any other control device. ...
The P.M.A KS40 series temperature controller has a ...
Description:
The P.M.A KS40 series temperature controller has a supply voltage rating ranging from 90VAC to 250VAC. This high precision controller has a width of 48mm and a height of 96mm(1/8DIN). It has three process outputs that are three relays and ...
The STEVAL-IHM023V3 Evaluation Board is an AC-DC inverter ...
Description:
The STEVAL-IHM023V3 Evaluation Board is an AC-DC inverter that generates a three-phase waveform for driving two- or three-phase motors such as induction motors or Permanent-Magnet Synchronous Motor (PMSM) motors up to 1000W. Minimum input voltage: 125VDC or 90VACMaximum input voltage: ...
The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit ...
Description:
The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated ...