Tektronix THDP0200 Oscilloscope Probe, Probe Type: Differential, High Voltage 200MHz 1.5kV

  • RS-stocknr. 752-7357
  • Fabrikantnummer THDP0200
  • Fabrikant Tektronix
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Tektronix Oscilloscope Probes

The Tektronix is an active differential oscilloscope probe capable of safely measuring differential voltages up to ±1500V. This probe is effective in making measurements in IGBT circuits such as motor drives and power converters. It supports bandwidths up to 200MHz and slew rates up to 275V/ns at 1/250 gain.
A broad portfolio of high-voltage probing solutions that enable users to safely and accurately make floating measurements.
Note:
TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.
The THDP0100 is capable of measuring floating voltages up to 6000V safely. An over-range visual and audible indicator warns the user when the linear range of the probe is exceeded.
Supplied with:
2 probe tips
2 large hook clips
2 small hook clips
2 probe heads

Features and Benefits

Bandwidth is DC to 100MHz
Attenuation ratio is 1:100 and 1:1000
Rise time is 3.5ps
Input impedance is 10Mohmll2pF
Maximum common mode voltage is ±1.5KV
Maximum Input voltage is 1000V CAT II 600V CAT III
Wide compensation range (7pF-30pF)
CMRR (typical) is DC: > -80dB 100kHz: > -60dB 3.2MHz: > -30dB 100MHz: > -26dB
Overrange Indicator
Safety Certified
Switchable attenuation
Switchable bandwidth limit

Applications

Floating measurements
Switching power supply design
Motor drive design
Electronic ballast design
CRT display design
Power converter design and service
Power device evaluation
BNC interface (P5200A probes)
TekVPI interface (TMDP and THDP Series probes)
TekProbe interface

Certifications

CAT II 1000 V
CAT III 600 V

Specificaties
Kenmerk Waarde
Probe Type Differential, High Voltage
Attenuation 1:50, 1:500
Bandwidth 200MHz
Maximum Common Mode Input Voltage 1.5kV
Connector Type BNC
Model Number p THDP0200
Safety Category Level CAT II, CAT III
Safety Category Voltage 600 V, 1000 V
Series THD
Safety Category CAT II 1000 V, CAT III 600 V
Rise Time 1.8ps
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2.170,00
(excl. BTW)
2.625,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.170,00
Related Products
Offering up to 200 MHz bandwidth and 1 ...
Description:
Offering up to 200 MHz bandwidth and 1 GS/s sample rate, the MSO2000B Mixed Signal Oscilloscope Series from Tektronix delivers advanced debug features at an entry-level price. Users can quickly find and diagnose problems in complex designs with up to ...
MDO3000 oscilloscopes are designed to meet users' needs ...
Description:
MDO3000 oscilloscopes are designed to meet users' needs and aspirations now and into the future. Each model is multi-functional with integrated basic spectrum analyzer, Wave Inspector Navigation, MSO, serial and parallel bus triggering and analysis, and digital voltmeter. Optional instrument ...
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ...
Description:
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput impedance ...
For high-speed switch mode power supply design; CAN/LIN ...
Description:
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development. ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...