Martindale PD240 Proving Unit 2mA 240V, RSCAL

RS-stocknr.:: 913-7031
Fabrikantnummer:: PD240
Fabrikant:: Martindale

Martindale PD240 Proving Unit 2mA 240V, RSCAL

Subtotaal (1 eenheid)*

€ 169,12

(excl. BTW)

€ 204,64

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 50 stuk(s) vanaf 02 juni 2026
Plus verzending 10 stuk(s) vanaf 24 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 169,12

*prijsindicatie

RS-stocknr.:: 913-7031
Fabrikantnummer:: PD240
Fabrikant:: Martindale

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Martindale
	Product Type	Proving Unit
	Output Voltage	240V
	Power Source	Battery
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	40°C
	Length	144mm
	Standards/Approvals	No
	Width	63mm
	Height	31mm
	Weight	180g
	Calibrated	RSCAL
	Test Current	2mA

	Alles selecteren
	Merk Martindale
	Product Type Proving Unit
	Output Voltage 240V
	Power Source Battery
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 40°C
	Length 144mm
	Standards/Approvals No
	Width 63mm
	Height 31mm
	Weight 180g
	Calibrated RSCAL
	Test Current 2mA

Vrijgesteld

Land van herkomst:: PH

Martindale PD240 Pocket Sized Proving Unit

The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.

Features and Benefits

Output voltage 240 V + 4% DC at 2 mA, 3.5 mA maximum

LED power indicator threshold180 V + 4% DC output

Minimum operating battery level 5 V DC

Operating temperature range -10 to 40 °C at maximum 70% RH

Dimensions 144 x 63 x 31 mm

Weight 180 g approximately (including battery)

Martindale Lock-Off Kits, Voltage Indicators and Proving Units

Note

Not for use with Martindale VI13700G voltage indicators or Drummond test lamps

Standards

BS-EN61010-1 2001

Supplied with

Battery, belt clip, instruction manual