KEMET PL Proximity Sensor 5 m 2 V 15V 4 Tape & Reel
- RS-stocknr.:
- 205-5825P
- Fabrikantnummer:
- PL-Q873-02
- Fabrikant:
- KEMET
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd op een doorlopende strip)*
€ 53,50
(excl. BTW)
€ 64,70
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 17 maart 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 99 | € 5,35 |
| 100 - 249 | € 4,45 |
| 250 - 499 | € 3,66 |
| 500 + | € 3,56 |
*prijsindicatie
- RS-stocknr.:
- 205-5825P
- Fabrikantnummer:
- PL-Q873-02
- Fabrikant:
- KEMET
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | KEMET | |
| Product Type | Proximity Sensor | |
| Maximum Output Current | 20A | |
| Maximum Output Voltage | 0.55V | |
| Sensing Distance | 5m | |
| Mount Type | Surface | |
| Package Type | Tape & Reel | |
| Pin Count | 4 | |
| Width | 4.8mm | |
| Length | 5mm | |
| Height | 1.7mm | |
| Minimum Operating Temperature | -40°C | |
| Automotive Standard | No | |
| Series | PL | |
| Maximum Supply Voltage | 15V | |
| Minimum Supply Voltage | 2V | |
| Maximum Operating Temperature | 70°C | |
| Alles selecteren | ||
|---|---|---|
Merk KEMET | ||
Product Type Proximity Sensor | ||
Maximum Output Current 20A | ||
Maximum Output Voltage 0.55V | ||
Sensing Distance 5m | ||
Mount Type Surface | ||
Package Type Tape & Reel | ||
Pin Count 4 | ||
Width 4.8mm | ||
Length 5mm | ||
Height 1.7mm | ||
Minimum Operating Temperature -40°C | ||
Automotive Standard No | ||
Series PL | ||
Maximum Supply Voltage 15V | ||
Minimum Supply Voltage 2V | ||
Maximum Operating Temperature 70°C | ||
The Kemet Pyroelectric Infrared Sensors use the pyroelectric effect of ceramic by absorbing infrared rays emitted from the human body. This detects the natural infrared signature produced by humans. Also, it can detect infrared rays without using lenses. Due to the absence of a lens, KEMET’s Pyro Sensor is low profile, as it does not protrude, which makes it ideal for gathering visual requirements. With KEMET’s proprietary piezoelectric ceramic material and element structure of the Pyroelectric Infrared Sensor, humans can be detected through glass or resin. This allows more freedom in the design of the outer appearance of the end product.
Reflow capable SMD configuration
Lens not required
A lens can be attached to the sensor
Wide view angle up to ±60 degrees (lens less)
View angle up to ±37/±28 degrees (with lens)
Detection possible through glass or resin
Low power consumption, down in the