Verder Pump
- RS-stocknr.:
- 764-231
- Fabrikantnummer:
- 155.9.0022
- Fabrikant:
- Verder
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 108,55
(excl. BTW)
€ 131,35
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 13 stuk(s) vanaf 04 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 108,55 |
*prijsindicatie
- RS-stocknr.:
- 764-231
- Fabrikantnummer:
- 155.9.0022
- Fabrikant:
- Verder
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Verder | |
| Product Type | Pump | |
| Alles selecteren | ||
|---|---|---|
Merk Verder | ||
Product Type Pump | ||
- Land van herkomst:
- GB
Verderprene FDA 4.8ID x 2.4WT Tube Element
• Excellent mechanical strength
• Temp. range: +10°C to + 85°C
• Wide chemical resistance
• Excellent strength against
oxidising agents
• Can be autoclaved
• Compatible with most CIP and SIP solutions
• Temp. range: +10°C to + 85°C
• Wide chemical resistance
• Excellent strength against
oxidising agents
• Can be autoclaved
• Compatible with most CIP and SIP solutions
Compliance: ROHS
FDA 21 CFR 177.1210
FDA 21 CFR 177.2600
Finished articles may contact only food types I, II, IV-B, VI (up to 15% ethanol), V11B, and VIII as described in Rable 1 of 21 CFR 176.170(c)
Ingredients are produced under conditions of good manufacturing practice.
The manufacturer of any food, direct or indirect food additive, or food contact substance or article containing this product has the responsibility to ensure complaince with applicable FDA regulations and to ensure that any food contact article is technically suitable for the intended use.
Flow rate: 5-1100ml/min
Element connector / gasket material: PP/EPDM
To be used with 155.5.1001 only.
FDA 21 CFR 177.1210
FDA 21 CFR 177.2600
Finished articles may contact only food types I, II, IV-B, VI (up to 15% ethanol), V11B, and VIII as described in Rable 1 of 21 CFR 176.170(c)
Ingredients are produced under conditions of good manufacturing practice.
The manufacturer of any food, direct or indirect food additive, or food contact substance or article containing this product has the responsibility to ensure complaince with applicable FDA regulations and to ensure that any food contact article is technically suitable for the intended use.
Flow rate: 5-1100ml/min
Element connector / gasket material: PP/EPDM
To be used with 155.5.1001 only.