Tele Process Pump Controller, 250 V ac, +55°C
- RS-stocknr.:
- 182-9996
- Fabrikantnummer:
- G2ASMA20
- Fabrikant:
- Tele
Subtotaal (1 eenheid)*
€ 166,59
(excl. BTW)
€ 201,57
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 4 stuk(s) vanaf 17 november 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 166,59 |
*prijsindicatie
- RS-stocknr.:
- 182-9996
- Fabrikantnummer:
- G2ASMA20
- Fabrikant:
- Tele
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Tele | |
| Supply Voltage | 250 V ac | |
| IP Rating | IP20, IP40 | |
| Maximum Fluid Temperature | +55°C | |
| Alles selecteren | ||
|---|---|---|
Merk Tele | ||
Supply Voltage 250 V ac | ||
IP Rating IP20, IP40 | ||
Maximum Fluid Temperature +55°C | ||
- Land van herkomst:
- AT
Pump control, Alternating/parallel
Alternated access of two pumps or other devices
Even distribution of duty
Parallel duty at high demand
Operation using 1 or 2 input signals (two modes of operation)
Timing offset of the two loads to avoid water hammer effcects
Supply voltage selectable via TR2 power modules
2 separate change over relays for device control
Width 22.5mm
Industrial design
Task
Two pumps are installed at a sewage pumping station that are to be run alternately for equal periods to ensure equal wear.
Solution
The pump switchover system activates the pumps alternately, if needed, the second pump can also be activated so that both run at the same time (parallel operation)
Use/value
Equal wear, and therefore longer service intervals for both pumps
Minimised pump failures through nearly equal number of operating hours
Peak load coverage
Zero-voltage safety in the event of power failures
Applications
Centrifugal Pumps
Sewage Pumps
Water & Waste
Even distribution of duty
Parallel duty at high demand
Operation using 1 or 2 input signals (two modes of operation)
Timing offset of the two loads to avoid water hammer effcects
Supply voltage selectable via TR2 power modules
2 separate change over relays for device control
Width 22.5mm
Industrial design
Task
Two pumps are installed at a sewage pumping station that are to be run alternately for equal periods to ensure equal wear.
Solution
The pump switchover system activates the pumps alternately, if needed, the second pump can also be activated so that both run at the same time (parallel operation)
Use/value
Equal wear, and therefore longer service intervals for both pumps
Minimised pump failures through nearly equal number of operating hours
Peak load coverage
Zero-voltage safety in the event of power failures
Applications
Centrifugal Pumps
Sewage Pumps
Water & Waste
Gerelateerde Links
- Sensata Cynergy3 Process Pump Controller +45°C
- Sensata Cynergy3 Process Pump Controller for Hydromatic +60°C
- Xylem Process Pump Controller for Standard Liquid Pump, 415 V ac
- RS PRO Process Pump Controller for Brushless Micropump +80°C
- Xylem Lowara Process Pump Controller for Diaphragm 240 V, +60°C
- Pump Controllers
- RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V
- RS PRO Process Pump Controller for Brushless Micropump, 6 → 28 V dc
