ROHM 7-Pin, DIP-7K BM2P241W-Z PWM Controller, 650V
- RS-stocknr.:
- 264-705
- Fabrikantnummer:
- BM2P241W-Z
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 verpakking van 5 eenheden)*
€ 8,85
(excl. BTW)
€ 10,70
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 100 stuk(s) vanaf 14 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 - 45 | € 1,77 | € 8,85 |
| 50 - 95 | € 1,68 | € 8,40 |
| 100 - 495 | € 1,558 | € 7,79 |
| 500 - 995 | € 1,432 | € 7,16 |
| 1000 + | € 1,38 | € 6,90 |
*prijsindicatie
- RS-stocknr.:
- 264-705
- Fabrikantnummer:
- BM2P241W-Z
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Product Type | PWM Controller | |
| Start-up Supply Current | 850μA | |
| Output Voltage | 10.00V | |
| Supply Current | 850μA | |
| Output Current | 1.61A | |
| Package Type | DIP-7K | |
| Minimum Supply Voltage | 9.5V | |
| Maximum Supply Voltage | 650V | |
| Topology | Back Converter | |
| Pin Count | 7 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Duty Cycle | 45% | |
| PWM Controller Type | Current Mode | |
| Maximum Operating Temperature | 105°C | |
| Standards/Approvals | No | |
| Length | 9.27mm | |
| Width | 6.35mm | |
| Series | BM2Pxx1W-Z | |
| Height | 8.63mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Product Type PWM Controller | ||
Start-up Supply Current 850μA | ||
Output Voltage 10.00V | ||
Supply Current 850μA | ||
Output Current 1.61A | ||
Package Type DIP-7K | ||
Minimum Supply Voltage 9.5V | ||
Maximum Supply Voltage 650V | ||
Topology Back Converter | ||
Pin Count 7 | ||
Minimum Operating Temperature -40°C | ||
Maximum Duty Cycle 45% | ||
PWM Controller Type Current Mode | ||
Maximum Operating Temperature 105°C | ||
Standards/Approvals No | ||
Length 9.27mm | ||
Width 6.35mm | ||
Series BM2Pxx1W-Z | ||
Height 8.63mm | ||
Automotive Standard No | ||
The ROHM PWM type DC or DC converter for AC or DC provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolation. By a built-in startup circuit that tolerates 650 V, this IC contributes to low power consumption. A current detection resistor as internal device realizes the small power supply designs. Since a current mode control is utilized, the current can be restricted in each cycle and an excellent performance is demonstrated in the bandwidth and transient response. The switching frequency is fixed to 65 kHz. A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in Super Junction MOSFET which tolerates 650 V makes the design easy.
PWM Current Mode Method
Frequency Hopping Function
Burst Operation at Light Load
Built-in 650 V Startup Circuit
Built-in 650 V Super Junction MOSFET
VCC UVLO (Under Voltage Lockout)
VCC OVP (Over Voltage Protection)
Over Current Detection Function per Cycle
Soft Start Function