Raspberry Pi, Pi NoIR Series, Camera Module Camera Module, CSI-2, 3280 x 2464 pixel

RS-stocknr.:: 913-2673
Fabrikantnummer:: RASPBERRY PI NOIR CAMERA MODULE V2
Fabrikant:: Raspberry Pi

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 17,66

(excl. BTW)

€ 21,37

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

116 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 17,66
5 - 9	€ 17,22
10 +	€ 16,94

*prijsindicatie

RS-stocknr.:: 913-2673
Fabrikantnummer:: RASPBERRY PI NOIR CAMERA MODULE V2
Fabrikant:: Raspberry Pi

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Raspberry Pi
	Sub Type	Camera Module
	Product Type	Camera Module
	Series	Pi NoIR
	Number of Channels	1
	Supported Bus Interfaces	CSI-2
	Maximum Resolution	3280 x 2464 pixel
	Minimum Operating Temperature	-20°C
	Maximum Frame Rate	30fps
	Maximum Operating Temperature	60°C
	Height	9mm
	Width	25mm
	Standards/Approvals	RoHS, BS EN 61340-5-1:2007, ANSI/ESD S20.20:2014
	Length	23.86mm

	Alles selecteren
	Merk Raspberry Pi
	Sub Type Camera Module
	Product Type Camera Module
	Series Pi NoIR
	Number of Channels 1
	Supported Bus Interfaces CSI-2
	Maximum Resolution 3280 x 2464 pixel
	Minimum Operating Temperature -20°C
	Maximum Frame Rate 30fps
	Maximum Operating Temperature 60°C
	Height 9mm
	Width 25mm
	Standards/Approvals RoHS, BS EN 61340-5-1:2007, ANSI/ESD S20.20:2014
	Length 23.86mm

Land van herkomst:: GB

Raspberry Pi NoIR Bulk Camera Board V2

The Raspberry Pi NoIR board V2 camera module is single channel, 8 megapixels and supports CSI-2 bus interface. It has a maximum frame rate capture of 30fps. This high definition (HD) NoIR camera board connects to any Raspberry Pi or compute module, allowing you to create HD videos and still photographs. The Pi NoIR (No Infrared) is the same as the standard camera module but without an IR filter and thus it is great for photography and videography in the dark. It utilises the IMX219PQ image sensor from Sony, which offers high-speed video imaging and high sensitivity. It also offers reduced image contamination such as fixed pattern noise and smearing. To connect the NoIR camera module to pi, a 15cm ribbon cable is attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, we can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs.

Features and Benefits

15-pin ribbon cable

Automatic 50/60Hz luminance detection

Automatic black level calibration

Automatic exposure control, white balance and band filter

High data capability

High-quality imagery

No IR filter

Operating temperature ranges between -20°C and 60°C

Supports 1080p, 720p60 and VGA90

Applications

Ideal for capturing HD videos and still photographs at night

Monitoring plant health and nocturnal animals

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007