Eaton RCD, 10A, 2 Pole, 30mA, Type C, 230V
- RS-stocknr.:
- 922-8715
- Fabrikantnummer:
- 236082 PKNM-10/1N/C/003-A-MW
- Fabrikant:
- Eaton
Subtotaal (1 eenheid)*
€ 159,86
(excl. BTW)
€ 193,43
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 12 stuk(s) klaar voor verzending
- 2 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 159,86 |
*prijsindicatie
- RS-stocknr.:
- 922-8715
- Fabrikantnummer:
- 236082 PKNM-10/1N/C/003-A-MW
- Fabrikant:
- Eaton
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Eaton | |
| Circuit Breaker Type | RCD | |
| Current Rating | 10A | |
| Number of Poles | 2 | |
| Range | PKNM | |
| Trip Sensitivity | 30mA | |
| Tripping Characteristics | Type C | |
| Voltage Rating | 230V | |
| Standards Met | CE | |
| Overall Dimensions | 35 x 65.5 x 80mm | |
| Earth Leakage Protection Type | A | |
| Breaking Capacity at Maximum Voltage Rating | 10 kA | |
| Overall Width | 65.5mm | |
| Reset Actuator Type | Toggle Switch | |
| Mounting Style | DIN Rail Mount | |
| Rated AC Voltage | 230V | |
| Overall Depth | 80mm | |
| Break Time | Instantaneous | |
| Overall Length | 35mm | |
| Terminal Contact Type | Screw | |
| Alles selecteren | ||
|---|---|---|
Merk Eaton | ||
Circuit Breaker Type RCD | ||
Current Rating 10A | ||
Number of Poles 2 | ||
Range PKNM | ||
Trip Sensitivity 30mA | ||
Tripping Characteristics Type C | ||
Voltage Rating 230V | ||
Standards Met CE | ||
Overall Dimensions 35 x 65.5 x 80mm | ||
Earth Leakage Protection Type A | ||
Breaking Capacity at Maximum Voltage Rating 10 kA | ||
Overall Width 65.5mm | ||
Reset Actuator Type Toggle Switch | ||
Mounting Style DIN Rail Mount | ||
Rated AC Voltage 230V | ||
Overall Depth 80mm | ||
Break Time Instantaneous | ||
Overall Length 35mm | ||
Terminal Contact Type Screw | ||
- Land van herkomst:
- RO
Eaton RCD, Screw Terminals, Front Toggle Switch - PKNM Series - 236082 PKNM-10/1N/C/003-A-MW
Keep your people safe from electric shocks with this RCD from Eaton. Its type-C tripping characteristics make it suitable for protecting more powerful motors. If the current exceeds two to five times the rated load, the unit will trip and shut off the power before any damage can be done. Once you've found and rectified the fault, simply flick the toggle switch to reset the RCD and get up and running again.
Features & Benefits
• Screw terminals help you quickly make secure electrical connections
• Red and green contact position indicators let you check the status at a glance
• Single-pole plus neutral configuration means it protects both the phase and neutral conductors in single-phase loads such as lighting
• 10A current rating to protect circuits with the same input
• Red and green contact position indicators let you check the status at a glance
• Single-pole plus neutral configuration means it protects both the phase and neutral conductors in single-phase loads such as lighting
• 10A current rating to protect circuits with the same input
What's the difference between an RCD and an MCB?
An RCD (residual current device) is a safety device that detects and disconnects power when it senses a leakage of current. An MCB (miniature circuit breaker) is designed to protect circuits from overcurrents and short circuits by interrupting the flow of current. While both enhance electrical safety, an RCD focuses on keeping people safe rather than protecting the circuit.
Note
Eaton formerly known as Moeller