SICK Contrast Sensor RGB LED 13 mm, PNP, 100 mA Analogue, IP67 28.8V
- RS-stocknr.:
- 285-9628
- Fabrikantnummer:
- KTX-WP9114124IZZZZ
- Fabrikant:
- SICK
Subtotaal (1 eenheid)*
€ 517,12
(excl. BTW)
€ 625,72
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 5 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 517,12 |
*prijsindicatie
- RS-stocknr.:
- 285-9628
- Fabrikantnummer:
- KTX-WP9114124IZZZZ
- Fabrikant:
- SICK
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SICK | |
| Product Type | Contrast Sensor | |
| Light Source | RGB LED | |
| Output Type | PNP | |
| Maximum Current | 100mA | |
| Switching Frequency | 50kHz | |
| Terminal Type | M12 Connector | |
| Interface Type | Analogue | |
| LED Status Display | Yes | |
| Maximum Supply Voltage | 28.8V | |
| Housing Material | Vistal | |
| Series | KTX | |
| IP Rating | IP67 | |
| Maximum Detection | 13mm | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | CE, cULus, UKCA | |
| Alles selecteren | ||
|---|---|---|
Merk SICK | ||
Product Type Contrast Sensor | ||
Light Source RGB LED | ||
Output Type PNP | ||
Maximum Current 100mA | ||
Switching Frequency 50kHz | ||
Terminal Type M12 Connector | ||
Interface Type Analogue | ||
LED Status Display Yes | ||
Maximum Supply Voltage 28.8V | ||
Housing Material Vistal | ||
Series KTX | ||
IP Rating IP67 | ||
Maximum Detection 13mm | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals CE, cULus, UKCA | ||
- Land van herkomst:
- DE
SICK KTX Series Contrast Sensor, 13mm Maximum Detection, IP67 - KTX-WP9114124IZZZZ
This contrast sensor detects differences in reflectivity for automation and control tasks, operating in industrial environments where ruggedness and clear status indication are required. It uses an analogue output and provides Visual feedback via a multi‑colour light source, making it suitable for integration with control systems that need continuous contrast measurement and simple connectivity.
Features and Benefits:
• Analogue output enables proportional signal for fine contrast discrimination
• RGB light source offers multi‑tone indication for quick diagnostics
• IP67 enclosure permits washdown and dust‑tight operation
• M12 connector simplifies secure electrical connection in panels
• Switching capability up to 50 kHz supports high‑speed detection demands
• PNP output limits wiring changes when interfacing with common PLC inputs
• RGB light source offers multi‑tone indication for quick diagnostics
• IP67 enclosure permits washdown and dust‑tight operation
• M12 connector simplifies secure electrical connection in panels
• Switching capability up to 50 kHz supports high‑speed detection demands
• PNP output limits wiring changes when interfacing with common PLC inputs
Applications
• Suitable for print registration alignment monitoring on production lines
• Ideal for label detection and colour contrast sorting systems
• Used with conveyor inspection stations for edge and gap sensing
• Can be used for pick‑and‑place verification in assembly automation
• Ideal for label detection and colour contrast sorting systems
• Used with conveyor inspection stations for edge and gap sensing
• Can be used for pick‑and‑place verification in assembly automation
What are the environmental operating limits for this device?
It functions reliably between -20°C and 60°C, covering typical shopfloor temperature ranges.
How much current should be planned for when designing the supply?
The device draws up to 100 mA maximum, so cabling and supply must accommodate that peak.
Which supply voltage levels are compatible with the sensor?
It accepts supply voltages up to 28.8 V, allowing use with common industrial DC sources.
How close can it detect contrast changes from the target surface?
It is specified to detect contrasts up to 13mm maximum from the sensing face.
Gerelateerde Links
- SICK Contrast Sensor RGB LED 13 mm 100 mA, IP67 28.8V
- SICK Contrast Sensor RGB LED 13 mm 100 mA, IP67 28.8V dc
- SICK Contrast Sensor RGB LED 200 mm 100 mA, IP67 28.8V dc
- SICK Contrast Sensor RGB LED 13 mm 100 mA, IP67 28.8V dc
- SICK Contrast Sensor RGB LED 13 mm 100 mA Analogue, IP67 30V dc
- SICK Contrast Sensor RGB LED 13 mm 100 mA IO-Link, IP67 28.8V
- SICK Contrast Sensor RGB LED 40 mm 100 mA, IP67 28.8V dc
- SICK Contrast Sensor RGB LED 13 mm 100 mA Analogue, IP67 30V dc
